User Manual

21
DTX-PRO Owner’s Manual
Using a USB Flash Drive
Setup Guide
Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel of the DTX-PRO and record your perfor-
mance directly to the USB flash drive. Also, you can save DTX-PRO settings to and load settings from a USB flash drive.
 Connecting a USB Flash Drive to the DTX-PRO
Precautions When Using the [USB TO DEVICE] Terminal
When connecting a USB flash drive to the [USB TO DEVICE] terminal, be sure to follow the important precautions below.
 Compatible USB Devices
USB flash drives only
Please check the URL shown below for a list of compatible USB flash drives.
https://download.yamaha.com/
 Connecting a USB Flash Drive
When connecting a USB device to the [USB TO DEVICE] terminal, make sure that the connector on the DTX-PRO is
appropriate and that it is connected in the proper direction.
Although USB devices 2.0 to 3.0 can be used on the DTX-PRO, the amount of time for saving to or loading from the USB
device may differ depending on the type of data or the status of the instrument.
Using a USB Flash Drive
NOTE
For more information about the handling of USB flash drives, refer to the owner’s manual of your USB flash drive.
NOTE
• Other USB devices such as USB hub, mouse, computer keyboard, cannot be used.
• A USB cable cannot be used to connect a USB device to the [USB TO DEVICE] terminal.
NOTICE
The rating of the [USB TO DEVICE] terminal is a maximum of 5 V / 500 mA. Do not connect USB devices having a rating
above this, since this can cause damage to the instrument itself.
NOTICE
• Avoid connecting or disconnecting the USB device during playback/recording and file management operations (such as
Save, Copy, Delete, and Format), or when accessing the USB device. Failure to observe this may result in “freezing” of
the operation of the instrument or corruption of the USB device and the data.
• When connecting then disconnecting the USB device (and vice versa), make sure to wait a few seconds between the
two operations.