User Manual

DTX700

Depending on the version of the firmware, you may need to update it. Before you connect the module

to your DT50S/DT50K triggers, be sure to check the version of your module’s firmware.

1. While holding down the drum trigger module’s [REC] button, turn on the power.

2. Confirm the version displayed on-screen. Look for the number after “Firm Ver:”.

If the version is 1.03 or earlier, search for “DTX700” on the web site below, and then follow the steps on the Firmware

Updater page to update the firmware.

Yamaha Downloads: http://download.yamaha.com

Confirm that the drum trigger module has been updated to Version 1.10, and then proceed to the setup procedures on the fol-

lowing page.

Checking the Firmware Version