User Manual

17
DTX900
Unless otherwise noted, “DTX900” in this manual refers to the DTX900M, DTX900, and DTX-
TREME III drum trigger modules.
Please interpret it as referring to your module.
Depending on the version of the firmware, you may need to update it. Before you connect the module
to your DT50S/DT50K triggers, be sure to check the version of your module’s firmware.
1. While holding down the [F1] button and the [REC] button simultaneously, turn on the drum trigger module.
2. Confirm the version displayed on-screen.
If the version is 1.05 or earlier, search for “DTX900” on the web site below, and then follow the steps on the Firmware
Updater page to update the firmware.
Yamaha Downloads: http://download.yamaha.com
Confirm that the drum trigger module has been updated to Version 1.10, and then proceed to the setup procedures on the fol-
lowing page.
Checking the Firmware Version
DTX900M/DTX900/DTXTREME III