User Manual

DTX-MULTI 12

TIPS!

This section provides tips on how to make your drum triggers even easier to use.

 Configuring Startup Settings

You can configure settings so that stored pad type and voice settings will be automatically selected when you turn on the

instrument.

1. Press the [UTILITY] button to access the Utility setting area.

2. Use the [ ]/[ ] buttons and the [ENTER] button to navigate to the GENERAL page (UTIL1), and from there to the

Startup Kit page (UTIL1-3).

3. Set the User Kit you stored as described in “2-4. Storing Voices”.

4. Navigate to the GENERAL page (UTIL1), and from there to the Startup Trigger page (UTIL1-5).

5. Select the User trigger setup you stored as described in “2-2. Storing Pad Types”.

6. Press the [STORE] button.

7. To proceed, press the [ENTER] button.

Notice

Never attempt to turn off the instrument while the message “Please keep power on” is shown. If this precaution is not

observed, user data may be lost or the internal system may be damaged, rendering your instrument unable to startup nor-

mally when it is next turned on.