Front Surround System Owner's Manual • Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS NOTICE AND INFORMATION 4 BEFORE USING THE UNIT 6 5 Connecting to a network........................................ 21 Network functions and the MusicCast CONTROLLER app........................................ 21 Wired network connections................................................................................................ 22 Wireless network connections............................................................................................
APPENDIX Play music stored on a media server (computer or NAS)................................................................................ 38 56 Playing music stored on a media server (computer or NAS)................................... 38 When any problem appears (General)........................ 56 Listening to Internet radio........................................... 39 When any problem appears (Power and system function).........................................................................
NOTICE AND INFORMATION Information Indicates notes on instructions, restrictions on functions, and additional information that may be helpful. Trademarks Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, iPad, iPad Air, iPad Pro and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
• This manual uses the following signal words for the important information: – The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. WARNING This content indicates “risk of serious injury or death.” Wi-Fi and Wi-Fi CERTIFIED are registered trademarks of Wi-Fi Alliance®. – CAUTION This content indicates “risk of injury.” – NOTICE Indicates points that you must observe in order to prevent product failure, damage or malfunction and data loss, as well as to protect the environment.
BEFORE USING THE UNIT Features Introduction This front surround system allows for the enjoyment of dynamic sound with video played on a TV. TV AirPlay Playback device (BD/DVD player) Internet radio Streaming service Wireless router Computer (NAS) The unit • Play audio from a TV or BD/DVD player in surround sound. • Play audio from a Bluetooth device with excellent quality. • Play audio over a network with superior sound quality.
3D surround playback Support for playback of Bluetooth devices Surround sound can be heard not only from horizontal directions, but also from varying heights when DTS Virtual:X is used. For details, see the following: Easily play content from a Bluetooth-compatible smartphone, tablet, or computer. In addition, our exclusive Compressed Music Enhancer technology improves sound quality and characteristics, and can be used to enjoy realistic and impressive sound.
• “Network functions and the MusicCast CONTROLLER app” (p.21) Visit the Yamaha website for more information. Bass extension The bass extension function boosts low bass levels to enjoy more powerful sound. For details, see the following: • “Enjoying enhanced bass sound (bass extension)” (p.31) Clear voice The clear voice function makes speech, such as dialog and narration, clearer. For details, see the following: • “Playback of human voices clearly (clear voice)” (p.
Accessories Using the remote control Checking the accessories Preparing the remote control Make sure you have received all of the following accessories. Remove the battery’s insulating strip before attempting to use the remote control. Center unit (ATS-CU4080) Remote control * A CR2025 Lithium battery has already been inserted into the remote control. Wireless subwoofer (NS-WSW43) In this manual, the wireless subwoofer is referred to as “subwoofer”.
Replacing the battery in the remote control Press and hold the release tab firmly in the direction indicated by [A], and slowly slide the battery holder out in the direction indicated by [B].
Part names and functions Part names and functions of the front/top panel The part names and functions of the front and top panels are as follows. b a c d e f g f 1 Indicators The indicators on the top panel flash or glow, to show the operation and setting status. In this manual, indicators status, such as off, glowing, and flashing, are shown as the illustrations below. Off Glows Flashes NOTE 4 } / { (volume +/-) The brightness of the indicators can be changed using DIMMER on the remote control.
7 Remote control sensors Receive infrared signals from the remote control of the unit (p.9). NOTE ▪ 2, 3, 4 and 5 are touch sensors. Touch icons with your finger to control functions. ▪ Do not place any objects on the touch panel as doing so may result in unintended operations. ▪ When touch panel control is disabled, no operations can be performed using the unit’s touch panel. This prevents accidental operation of the unit.
Part names and functions of the rear panel The part names and functions of the rear panel are as follows. The illustrations in this manual include labels next to the jacks on the bottom of the unit for easy identification. b c e d f g a 1 AC IN jack Connect the power cord of the center unit (p.21). 2 NETWORK jack For connecting to a network with a network cable (p.22). 3 HDMI OUT (ARC) jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.18).
Part names and functions of the subwoofer Front panel Rear panel b a c 1 Bass reflex port 2 AC IN jack Connect the power cord of the subwoofer (p.21). 3 PAIRING button 4 STANDBY indicator Shows subwoofer’s status (p.15). 5 * indicator Glows when the center unit and subwoofer are connected wirelessly. Use to pair the center unit with the subwoofer manually (p.51).
Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. 3 Input buttons 1 z (power) button a b c d Turn on/off the unit. Select an input source to be played back. Center unit • HDMI : Sound from a device connected to the HDMI IN jack (p.20) • TV : TV audio (p.18) Turned on • ANALOG : Sound from a device connected to the ANALOG input jack (p.20) i e The indicator for the last input source selected glows.
: VOLUME (+/-) button Adjust the volume of the unit (p.27). A | (mute) button Mute the audio output (p.27). Press the key again to unmute. B BASS EXTENSION button Enable/disable the bass extension function (p.31). C DIMMER button Change the brightness of the indicators (p.43).
PREPARATION 1 Installation Installing the center unit on a TV stand, etc. NOTICE ▪ Do not stack the center unit and a BD player or other device directly on each other. Doing so may cause a malfunction due to vibrations. ▪ Avoid touching, and never place any weight or pressure on, the subwoofer’s speaker (portion covered with fabric). Doing so may damage the speakers. Position the center unit with the touch panel facing up on a TV stand, etc.
2 Connecting a TV Connecting a TV that supports Audio Return Channel (ARC) What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
▪ The unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the unit to the HDMI input jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV. Connecting a TV that does not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (sold separately) and an optical digital audio cable (supplied). ▪ If the TV has no optical jack, connect the audio output jack on the TV to the ANALOG input jacks on the unit.
3 Connecting playback devices Analog connection with a playback device HDMI connection with a playback device Connect a playback device such as a BD/DVD player to the unit with an HDMI cable (sold separately). Use the HDMI cable to best connect a playback device equipped with the HDMI output jack. Connect a playback device, such as a game console or a TV that does not have an optical digital audio output, to the unit via a 3.5 mm stereo mini plug cable (sold separately).
4 Connecting the power cord 5 Connecting to a network Connecting the power cord Once all connections have been made, connect the supplied power cords to the AC IN jacks on the center unit and subwoofer respectively, and plug the power cables into AC wall outlets.
▪ Some security software installed on your computer, or network device settings (such as a firewall), may block the unit’s access to your computer or Internet radio stations. Should this occur, change security software and/or network device settings. Wired network connections To use a wired network connection, connect the unit to a router via an STP network cable (category 5 or higher straight cable; sold separately).
Wireless network connections Connecting with the MusicCast CONTROLLER app (registering the unit as a MusicCast-enabled device) Connect the unit to a wireless router (access point) to use a network. See the following for instructions on connecting to a wireless router (access point). • “Connecting with the MusicCast CONTROLLER app (registering the unit as a MusicCast-enabled device)” (p.
2 4 Tap “Setup”. Touch and hold z/CONNECT until the * indicator on the unit starts flashing. Flashes 3 Turn on the unit, and then tap “Next”.
5 Entering the router's password Follow the on-screen instructions to configure network settings. When a screen like that at left below is displayed, select the network to which the unit will be connected and enter the router’s password (encryption key). The router’s password (encryption key) is often noted on the router itself. Refer to documentation supplied with the router for details. NOTE When a screen like that below is displayed, follow the on-screen instructions to configure network settings.
6 NOTE To register the unit as a MusicCast-enabled device, configure the following items. If a different MusicCast-enabled device is already registered with the MusicCast CONTROLLER app, tap ~ (Settings) in the room selection screen, and then select ▪ Location name (“home”, “John’s house”, etc.) “Add New Device” to add the unit to the app.
PLAYBACK Basic operations Basic procedure for playback 1 Basic procedure for playing back music is as follows. Press z to turn on the unit. The center unit and subwoofer are automatically connected via wireless connection. Once the connection has been successfully established, the * indicator on the subwoofer’s rear panel glows, and the unit is ready for playback.
3 6 Use the input buttons to select an input source to be played back. HDMI: Sound from a device connected to the HDMI IN jack Adjust sound settings to suit individual preferences. NOTE ▪ If the * indicator on the subwoofer does not glow properly the first time the unit is turned on, pair the center unit and subwoofer manually. For details, see the following: TV: TV audio ANALOG: Sound from a device connected to the ANALOG input jack – “Pairing the center unit and subwoofer manually” (p.
▪ To mute the sound, press |. Press | again to unmute. Flash (on mute) ▪ When sound input to the HDMI IN jack is output from the TV, the volume level does not change even if you press VOLUME (+/-) or |. ▪ To adjust the subwoofer volume, press SUBWOOFER (+/-). The subwoofer volume can be adjusted separately from the whole volume.
Enjoying your favorite sound Playback with 3D surround sound Playback with surround sound Press 3D SURROUND to switch to 3D surround playback according to the input source or your individual preference. Press SURROUND to switch to surround playback according to the input source or your individual preference. When 3D surround playback is selected, DTS Virtual:X makes it possible to hear sound not only from horizontal directions, but also from varying heights. The SURROUND indicator glows white.
Playback of human voices clearly (clear voice) Enjoying enhanced bass sound (bass extension) Press CLEAR VOICE to turn on the clear voice function. Human voices such as lines in movies and TV shows, or news and sport commentary, are played clearly. Press BASS EXTENSION to turn on the bass extension function. You can enjoy enhanced bass sound and more powerful sound. Press the button again to disable the function. Press the button again to disable the function.
Use of a Bluetooth® device Listening to music stored on a Bluetooth® device 1 Press BLUETOOTH to select “Bluetooth” as the input source. The BLUETOOTH/NET indicator on the unit glows. Music files stored on a Bluetooth device, such as a smartphone, smart speaker, or digital music player, can be played on the unit over a wireless connection. Bluetooth devices Glows NOTE If Bluetooth devices have been connected before, the unit will connect to the last connected device when BLUETOOTH is pressed.
3 4 Select this unit in the list. When the unit has been registered as a MusicCastenable device, the room name specified for the unit is displayed in the list. Otherwise, “ATS-4080 XXXXX Bluetooth” is displayed. If a passkey (PIN) is required, enter the number “0000”. Play a song on the Bluetooth device. The unit will begin playing audio from the Bluetooth device.
Useful features for playback Using a TV’s remote control to operate the unit (HDMI control) 1 Turn on/off Both the TV and the unit turn on/off at the same time. 2 Switch input sources The HDMI control function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. The unit's input source switches accordingly when the TV’s input source is switched.
Showing audio information and function settings 1 HDMI glows (red): DTS TV glows (white): AAC The type of audio signal being played, as well as settings for functions such as the bass extension function can be confirmed by the status of indicators. 1 Show the type of audio signal. HDMI glows (white): Dolby Digital HDMI and TV off: PCM/analog input/no input 2 Press INFO on the remote control. Show whether Dolby Pro Logic II is enabled or disabled.
Play favorite input sources Registering favorites with the unit 1 Use the FAVORITE button to register input sources played over a network (Internet radio stations, music files stored on a media server, etc.) as favorites. 1 NOTE Favorites assigned to FAVORITE 1, 2, or 3 using the remote control will also be assigned to MusicCast CONTROLLER app “Favorites” 1, 2, and 3.
Play music with AirPlay Playing iTunes/iOS device music with AirPlay 2 Music files in iTunes, or stored on an iOS device such as an iPhone, can be played on the unit using the AirPlay function via a network. Click or tap the AirPlay icon in iTunes or on the iOS device, and select the unit (network name of the unit) as the audio output device.
Play music stored on a media server (computer or NAS) Playing music stored on a media server (computer or NAS) 3 NOTE When a music file is registered with No. 1, 2, or 3 in “Favorites” with the MusicCast CONTROLLER app, the registered music file can be played with FAVORITE 1, 2, or 3 on the remote control. For details, see the following: Music files stored on a media server can be played on the unit. NOTE ▪ Media sharing with this unit must first be enabled on the media server.
Listening to Internet radio Selecting an Internet radio station Bookmark an Internet station Select an Internet radio station and start playback. Bookmark an Internet station being played. NOTE NOTE ▪ Use the MusicCast CONTROLLER app installed on a mobile device to select an Internet station. Be sure to register the unit with the MusicCast network in advance. For details, see the following: Use the MusicCast CONTROLLER app installed on a mobile device to select an Internet station.
Tuning into registered Internet radio stations 1 Tap “Radio”, and then tap “Favorites” to select the desired Internet radio station.
Listening to streaming services Listening to a streaming service A streaming service can be heard using the MusicCast CONTROLLER app installed on a mobile device. On the MusicCast CONTROLLER screen, select the room name that was specified for the unit, and then select the streaming service to be tuned into by its station name. For details, see the MusicCast CONTROLLER app. NOTE ▪ Service is limited to certain areas.
Play music stored on mobile devices Playing songs stored on your mobile device 3 Play songs stored on your mobile device over a network. Use the MusicCast CONTROLLER app installed on your mobile device to play songs. Mobile device Router (wired or wireless) NOTE Be sure to register the unit with the MusicCast network in advance to use this function. For details, see the following: ▪ “Connecting with the MusicCast CONTROLLER app (registering the unit as a MusicCast-enabled device)” (p.
CONFIGURATIONS Configuring various functions Changing the brightness of the indicators (DIMMER) 2 Press and hold HDMI at least three seconds. Change the brightness of the indicators on the center unit. Each time DIMMER is pressed, the brightness of the indicators changes as follows. The HDMI control function is enabled or disabled, and the unit turns on. The indicator shows HDMI control function status for several seconds, and then all indicators glow. Dim (default setting) → Off → Bright → Dim → ...
Configuring HDMI audio output 2 Select the device from which audio input via the unit’s HDMI IN jack will be played when the HDMI control function is disabled. HDMI audio is output from this unit by default. Press and hold SURROUND at least three seconds. Settings The unit (default) Play HDMI audio input signal from the unit. TV Play HDMI audio input signal from the TV. 1 HDMI audio output switches between the unit and the TV, and the unit turns on.
Enabling/disabling touch panel control (child lock function) Setting the auto power standby function Enabling the auto power standby function prevents the unit from remaining on when not in use. When the auto power standby function is enabled, the unit automatically turns off in any of the following situations. Disable touch panel control to prevent children from accidentally operating the unit.
Using surround speakers (MusicCast Surround function) 3 4 Devices that support the MusicCast Surround function and serve as “Pairing Devices”, such as the MusicCast 20, can be used as surround speakers with this unit. Left surround speaker 1 2 Tap ~ (Setup). Tap 5 Right surround speaker Use the MusicCast CONTROLLER app to register the unit and devices that support the MusicCast Surround function (Pairing Devices) with the same location.
6 7 Select the room in which the unit is set up. Follow the instructions on the app screen and complete setup. Configure settings such as what devices will be connected as the unit’s surround speakers, and how many there are. NOTE ▪ This function will be made available through a future firmware update. For details, refer to the website for this product. ▪ Functions and installation may vary depending upon the devices that support the MusicCast Surround function (Pairing Devices) used.
Enabling/disabling the network standby function 2 Touch and hold } and touch z/CONNECT on the unit. Enabling the network standby function allows the unit to be turned on or off using a mobile or Bluetooth device as follows. This function is enabled by default. • When the unit is turned off, it will turn on with the following playback operations. – Music files are played using the AirPlay function.
Enabling/disabling a wireless (Wi-Fi) connection Enabling/disabling the Bluetooth function Enable or disable a wireless (Wi-Fi) connection. This function is enabled by default. Enable or disable the Bluetooth function. This function is enabled by default. 1 2 1 2 Turn off the unit. Press and hold NET at least three seconds. The wireless (Wi-Fi) connection is enabled or disabled, and the unit turns on.
Updating the unit’s firmware 1 New firmware that provides additional features or product improvements will be released as needed. Firmware can be updated using the MusicCast CONTROLLER app installed on a mobile device. Tap “Yes”. The firmware update will begin. A progress bar indicating update progress will be displayed by the app while firmware is updated.
Pairing the center unit and subwoofer manually 3 The center unit and subwoofer are automatically connected via wireless connection the first time the unit is turned on. If the center unit and subwoofer are not properly connected due to a temporary communications failure, pair the center unit and subwoofer manually. Within 30 seconds, press and hold the PAIRING button on the rear panel of the subwoofer at least three seconds.
Initializing the unit 1 Reset the settings of the unit to the factory presets. 1 2 Display Wi-Fi settings on the iOS device and select the unit from “SETUP A NEW AIRPLAY SPEAKER...”. Turn off the unit. Touch and hold | and z/CONNECT on the unit until all indicators flash. Name of the unit 2 Flash (initialized) When the following screen is displayed, select the network (access point) to which the unit will be connected.
Adjusting the levels of the speakers 3 Tap “MusicCast Surround/Stereo”. 4 Select the room in which the unit is set up. Adjust the levels of the surround speakers connected to the main unit using the MusicCast Surround function. This setting is available only when the MusicCast Surround function is in use. 1 2 Open the MusicCast CONTROLLER app. Tap ~ (Setup) on the room selection screen.
5 Setting the dynamic range compression Select “Speaker Setup”. Select the dynamic range compression level. This function is set to “No compression” by default. 1 2 Turn off the unit. Use the remote control to select the desired compression level. Compresssion level 6 Set up according to the instructions on the screen. Operations (buttons must be pressed consecutively within three seconds.) Compression (maximum) Apply the maximum amount of dynamic range compression.
The indicators show the compression level applied for several seconds.
APPENDIX When any problem appears (General) When any problem appears (Power and system function) First in trouble, check the following: The power turns off suddenly Refer to the following when the unit does not function properly. • The power cord of the unit (center unit and subwoofer), TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. l The auto power standby function activated.
The power cannot be turned on The unit does not function correctly l The protection circuitry has been activated three times consecutively. (If you try to turn on the power in this condition, the HDMI indicator will flash red.) To protect the product, the power cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.
When the unit is turned off, video and/or audio from a playback device are not output to the TV The unit cannot be operated using the TV’s remote control l The HDMI control function is incorrect. Confirm the settings are properly configured as follows. – The HDMI control function of the unit is enabled. – The HDMI control function is enabled on the TV. – Set audio output to any option other than TV.
l The HDMI control function is disabled. When connecting a TV that supports ARC (Audio Return Channel) to the unit using an HDMI cable only, enable the HDMI control function. To output audio signals from the unit with the HDMI control function disabled, connect the TV’s audio output jack to the unit’s TV input jack (optical digital) via the optical digital audio cable. For details, see the following: – “Configuring the HDMI control function” (p.
l The volume is too low. Turn up the volume of the subwoofer. For details, see the following: – “Basic procedure for playback” (p.27) The volume decreases when the unit is turned on l The automatic volume adjustment function is activated. To prevent excessive loudness, the unit automatically controls its volume within a certain level when the unit is turned on. Turn up the volume as required. For details, see the following: – “Basic procedure for playback” (p.
Noise is heard When any problem appears (Bluetooth®) l The unit is too close to another digital or high-frequency device. Move those devices away from the unit. The unit cannot be connected to a Bluetooth® device l Bluetooth is not selected as the input source. Select Bluetooth as the input source. For details, see the following: – “Listening to music stored on a Bluetooth® device” (p.32) l The unit is too far away from the Bluetooth device. Move the Bluetooth device closer to the unit.
No sound can be heard, or the sound cuts off intermittently from a Bluetooth® device When any problem appears (Network trouble) The network feature does not function l The volume on the Bluetooth device may be too low. Raise the volume on the Bluetooth device. l The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on the wireless router. l Bluetooth is not selected as the input source. Select Bluetooth as the input source.
Wireless network is not found The files in the media server (computer/ NAS) cannot be viewed or played back l Microwave ovens or other wireless devices might disturb the wireless communication. Turn off these devices or move them farther away from the unit and wireless router. If the wireless router supports the 5 GHz band, connect the unit to the network using the 5 GHz band. l The files are not supported by the unit or the media server.
The iOS device does not recognize the unit when using AirPlay l The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect the iOS device to the SSID which can access the unit. (Connect it to the Primary SSID at the top of the list.) The MusicCast CONTROLLER app does not detect the unit l The unit and mobile device are not in the same network.
Specifications Specifications (ATS-CU4080) Digital (optical) Analog (3.5 mm stereo mini) Amplifier section 50 W × 2ch HDMI Speaker section • Type Acoustic suspension type (non-magnetic shielding) • Driver 4.6 cm (1-3/4”) cone × 4 • Impedance • Frequency response • Impedance 4 Ω (8 Ω × 2) 1 (UPDATE ONLY) LAN 1 (NETWORK) Function Bluetooth version 9 kHz to 23 kHz 4Ω Ver 4.2 Supported profiles A2DP, AVRCP Supported codecs Sink function: SBC, AAC Bluetooth class PCM (up to 5.
[U.K. and Europe models] • Radio frequency [U.K. and Europe models] 2402 MHz to 2480 MHz • Maximum output power (EIRP) • Radio frequency 6.5 dBm (4.5 mW) Network 2.4 GHz band 2402 MHz to 2482 MHz (20 MHz) 5 GHz band 5170 MHz to 5250 MHz (20 MHz) 5250 MHz to 5330 MHz (20 MHz) Ethernet standard 5490 MHz to 5710 MHz (20 MHz) 100BASE-TX/10BASE-T 5735 MHz to 5835 MHz (20 MHz) • Maximum output power (EIRP) WAV (PCM format only) /AIFF/FLAC: up to 192 kHz Supported codecs 2.
Standby power consumption • [U.S.A., Canada and Taiwan models] – HDMI control off, network standby off 0.4 W – HDMI control off, network standby on (Wired/Wi-Fi/ Bluetooth) 1.6/1.8/1.7 W – HDMI control on, network standby off 0.7 W – HDMI control on, network standby on 2.2 W • [U.K. and Europe models and other models] – HDMI control off, network standby off 0.4 W – HDMI control off, network standby on (Wired/Wi-Fi/ Bluetooth) 1.6/1.8/1.7 W – HDMI control on, network standby off 0.
Specifications (NS-WSW43) Power consumption The specifications of the subwoofer are as follows. Standby power consumption • [U.S.A., Canada and Taiwan models] 0.8 W Amplifier section • [U.K. and Europe models and other models] 0.8 W Maximum rated output power 100 W Dimensions (W × H × D) Speaker section • Type • Driver • Frequency response • Impedance • Radio frequency band • Transmission range Weight Bass reflex type (non-magnetic shielding type) • Maximum output power (EIRP) 2Ω 2.
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz Supported HDMI audio and video formats • 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz NOTE The following HDMI audio and video formats can be used by the unit. ▪ Refer to documentation supplied with the playback device, and set the device appropriately. Audio signals ▪ When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
Supported digital audio formats File Sampling frequency (kHz) Quantization bits (bit) Bitrate (kbps) Number of channels Support for gapless playback MPEG-4 AAC 32/44.1/48 - 8 to 320 2 - FLAC 32/44.1/48/ 88.2/96/ 176.4/192 16/24 - 2 4 ALAC 32/44.1/48/ 88.2/96 16/24 - 2 4 AIFF 32/44.1/48/ 88.2/96/ 176.4/192 16/24 - 2 4 The following digital audio formats can be used by the unit.
Information for qualified contractors or dealers Mounting the center unit on a wall 1 Mount the center unit on a wall using the screw holes on the rear panel. Attach the mounting template (supplied) on a wall and mark for the screw holes. Mounting template (supplied) DRILL HERE / PERCER CIC DRILL HERE / PERCER CIC MOUNTING TEMPLATE / GABARIT DE FIXATION CAUTION ▪ To prevent the center unit from falling, attach it to a wall constructed of drywall (plasterboard).
3 Hang the center unit on the screws.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.
