Owner's Manual

Enabling/disabling the network standby

function

Enabling the network standby function allows the unit to be turned

on or off using a mobile or Bluetooth device as follows.

This function is enabled by default.

• When the unit is turned off, it will turn on with the following

playback operations.

– Music files are played using the AirPlay function.

– Music files stored on a network attached storage (NAS) unit are

played

• The unit can also be turned on and off using the MusicCast

CONTROLLER app installed on your mobile device.

• When a Bluetooth device is connected to this unit while it is off,

this unit turns on and the input source switched to

BLUETOOTH.

Turn off the unit.

Touch and hold

} and touch z/CONNECT on the

unit.

The network standby function is enabled or disabled,

and the unit turns on. The indicator shows network

standby function status for several seconds, and then all

indicators glow.

Glows (enabled)

Off (disabled)

NOTE

▪ The unit consumes more power when it is off with the network standby function

enabled than it does when it is off with this function disabled.

▪ Press INFO to confirm whether the network standby function is enabled or

disabled. For details, see the following:

– “Showing audio information and function settings” (p.35)