JA EN ZH マーチングドラムキャリア Marching Drum Carrier 行进鼓固定器 Owner’s Manual 使用说明书 MBH9500 MBH9500S マーチングバスドラム用 for Marching Snare Drum for Marching Bass Drum 适用于行进小军鼓 适用于行进大军鼓 中文 English マーチングスネアドラム用 日本語 MSH9500 MSH9500S 取扱説明書 MTH9500 MTH9500S MKH9500 MKH9500S マーチングマルチタム用 マーチングベル&マーチングシロフォン用 for Marching Multi-Toms for Marching Bell & Marching Xylophone 适用于行进组鼓 适用于行进钢片琴&行进木琴
Marching Drum Carrier Owner’s Manual MSH9500 MSH9500S MBH9500 MBH9500S for Marching Bass Drum MTH9500 MTH9500S for Marching Multi-Toms MKH9500 MKH9500S for Marching Bell & Marching Xylophone English for Marching Snare Drum
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. When children use the product, make sure that a guardian provides through instruction as given in this manual. Please keep this manual in a safe and handy place for future reference.
Notice Handling • The black coatings on the surface might be removed by friction. This is no problem and does not affect the functionality or durability of the product. • Always use the carrier with all the bolts securely tightened. Failure to do so can cause the instrument to fall over or loss of parts of the carrier. • When tilting up the instrument make sure that the instrument does not hit against the carrier. Failure to do so can cause damage to the instrument or the parts of the carrier.
Welcome Thank you for purchasing the Yamaha Marching Drum Carrier. This product is a carrier for marching instruments, designed with enhanced adjustability to fit different body sizes. Please read this Owner's Manual carefully before using the product in order to take full advantage of its various features. When you have finished reading the manual, keep it in a safe, accessible place, and refer to it when you need to better understand an operation or function.
Adjusting the Carrier Carriers can be adjusted to fit different body sizes. Make sure to adjust the carrier to the player before mounting the instrument on the carrier. The adjustable parts are the same for all carrier models. Intended only for instructional purposes, the illustration below shows the carrier for the marching snare drum (MSH9500, MSH9500S).
Adjusting the Carrier Arms By adjusting the arms, the mounting position of the instrument can be changed. Arm holder 1 Adjust the height of the arms and the spread angles. Bolt 2 Tighten the bolts of the arm holders with a tuning key. NOTICE Always tighten the bolts with the arms passing through the arm holders. Otherwise, the holders might be deformed. Arm When you remove an instrument from the carrier to put the carrier away or to move it to other places, the arms can be folded for safe transport.
Adjusting the Carrier Adjusting the arm position When the height is not sufficient, change the arm attachment positions on the belly plate. The height can be adjusted in four levels. Belly plate Bolts 1 Adjust the height of arm position. 2 Use the supplied hexagonal wrench to tighten the two bolts. Fix the arm holders to the belly plate. Hexagonal wrench Arm Arm holder Shoulder rests For more comfortable playing posture, the shoulder rests can be adjusted.
Setting the Snare Drum Make sure to install the attachment to the instrument before mounting the instrument on the carrier. 1. Installing the attachment to the instrument NOTE When installing the attachment to a snare drum with a slide-attachment, follow the instructions of “Previous settings for snare drum with slideattachment” on page 9. Attachment 1 Hold the tube lugs with the lug holders of the attachment as shown in the illustration. Use a tuning key to tighten the both bolts.
Setting the Snare Drum Previous settings for snare drum with slide-attachment Before installing the attachment to the snare drum, you must remove the lug holders from the attachment and assemble the tongue plate MAST600 (sold separately). 1 Remove both lug holders (see illustration) from Attachment the attachment. Lug holders 2 Fix the tongue plate (sold separately) with the longer side up, on the center holes of attachment.
Setting the Snare Drum 2. Mounting the instrument on the carrier 1 Insert the arms into the arm brackets of the attachment installed to the instrument. Carrier 2 Tighten the arm fixing screws by hand. Marching snare drum Attachment Arm fixing screw Arms Arm bracket Arms 3. Adjusting the angle of the instrument To adjust the angle, first put the carrier and instrument (properly mounted) down on a floor, for secure operation.
Setting the Bass Drum Carrier Marching bass drum Arms Mounting an instrument on the carrier Hook Attaching ring Mounting should be carried out by at least two persons. 1 Snap the drum harness hooks into the bass drum attaching rings. 2 With the heads of the bass drum perpendicular to Equally spaced the drummer's body, open both the holder's right and left support arms so they are centered and hold the body of the drum firmly in place.
Setting the Marching Multi-Toms Marching multi-toms Carrier Arms 1. Mounting the instrument on the carrier 1 Insert the arms of carrier into the arm brackets of the instrument. 2 Tighten the arm fixing screws by hand to fix the arms. Arm fixing screw Arm bracket Arm 2. Adjusting the angle of the instrument To adjust the angle, first put the carrier and instrument (properly mounted) down on a floor, for secure operation.
Setting the Marching Bell & Xylophone Make sure to install the frame to the instrument before mounting the instrument on the carrier. 1. Installing the frame to the instrument 1 Lay the marching bell & xylophone face down. 2 Use the supplied hexagonal wrench to loosen the screws A on the carrier frame so that the brackets can slide.
Setting the Marching Bell & Xylophone Carrier frame Carrier Marching bell/ Marching xylophone Arms 2. Mounting the instrument on the carrier 1 Insert the arms of the carrier into the arm brackets of the carrier frame installed to the instrument. 2 Tighten the arm fixing screws by hand. Arm fixing screw Arm bracket Arm 3. Adjusting the angle of the instrument To adjust the angle, first put the carrier and instrument (properly mounted) down on a floor, for secure operation.
〒430-8650 静岡県浜松市中区中沢町10-1 * 都合により、住所、電話番号、名称、営業時間、URLなどが変更になる 場合がございますので、あらかじめご了承ください。 Manual Development Group © 2017 Yamaha Corporation Published 08/2018 改版 POCP*.
