English Deutsch RS6 Owner’s Manual Benutzerhandbuch Mode d’emploi Manual do Proprietário Français 電子ドラムラック Português ELECTRONIC DRUM RACK RACK DE BATTERIE ÉLECTRONIQUE ⭫啉᭥ᷬ EN PT DE ZH 取 扱 説明書 FR JA
Precautions English PRECAUTIONS Before using, please read this assembly manual, and use this product in a safe and proper manner. * Please keep this manual in a safe place for future reference. WARNING If this symbol is ignored and the equipment is used improperly, fatal injury to persons or serious damage could occur. • Do not put burning items, such as candles, near the unit. A burning item may fall over and cause a fire.
Contents Precautions .................................................................. 2 Package Contents ........................................................ 4 Specifications............................................................... 4 Assembling the Rack ................................................... 6 Attaching the Holders...................................................
Package Contents After opening up the package containing your electronic drum rack, please verify that all of the following components are present. Main frame (×1) Snare holder (×1) Cymbal holder (×3) Owner’s Manual (this booklet) NOTE The drum key used for assembling the rack can be found in the pad set package. Specifications Weight: 10.1 kg *: The contents of this manual apply to the latest specifications as of the publishing date.
Fully-assembled rack Cymbal arm Clamp y Cymbal arm Clamp u Clamp i Right arm Drum trigger arm Clamp t Clamp q Snare arm Clamp e Clamp w Clamp r RS6 Owner’s Manual 5
Assembling the Rack 1. Lay the main frame down on a solid, level surface and loosen the clamp q bolt, open the right arm, and then tighten the bolt again so it is secure. Right arm Clamp q Loosen Bolt Tighten 2. Stand the main frame on a flat, level surface. If the raised main frame wobbles when you shake it, check for loose bolts and tighten them. 3.
4. Loosen the clamp t, y, u and i bolts, adjust the position of the snare arm, cymbal arm, drum trigger module arm and then tighten the bolts again so they are secure.
Attaching the Holders 1. Loosen the bolts on the following eight clamps (A to H) and rotate or move the clamps to the positions shown below. Following this, securely tighten all of the bolts to lock the clamps in place.
2. Attach a cymbal holder to each of the three cymbal clamps. Sleeve (black) Cymbal holder Bolt Cymbal clamp 2-1. Loosen the bolt on the cymbal clamp. 2-2. Insert the cymbal holder. 2-3. Securely tighten the bolt on the cymbal clamp. 3. Attach the snare holder to the snare clamp. CAUTION Take special care with the snare holder as the rod has a sharp tip that could cause injury. Snare holder Snare clamp Bolt 3-1. Loosen the bolt on the snare clamp. 3-2. Insert the snare holder. 3-3.
Drums Limited Warranty LIMITED WARRANTY ON YAMAHA DRUMS, HARDWARE AND ACCESSORY PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defectfree performance. Yamaha Corporation of America (“YAMAHA”) is proud of the experience and craftsmanship that goes into each and every YAMAHA product.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Para obter detalhes de produtos, entre em contato com o representante mais próximo da Yamaha ou com o distribuidor autorizado relacionado a seguir. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich.
雅马哈乐器音响 （中国）投资有限公司 上海市静安区新闸路1818 号云和大厦2楼 客户服务热线：4000517700 公司网址：http://www.yamaha.com.cn 制造商： 雅马哈株式会社 制造商地址：日本静冈县滨松市中区中泽町10-1 进口商： 雅马哈乐器音响 （中国）投资有限公司 进口商地址：上海市静安区新闸路1818号云和大厦2楼 原产地： 印度尼西亚 Manual Development Group ©2020 Yamaha Corporation Published 04/2020 2020 年 4 月 发行 POMA*.
