User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Introduction
- Included Accessories
- About this Manual
- Contents
- Component Names
- Setting Up
- Screen Configuration and Basic Operation
- Producing Reference Tones for Playing Harmony (Voice, Temperament, Hold, Octave, Transpose)
- Demonstrating Tempo and Rhythm (Metronome, Rhythm Style)
- Sharing Performances (Recording/Playback)
- Enhancing Basic Practice (Sound Back, Training)
- Restoring Factory Settings
- Advanced Settings (Settings)
- Connecting External Devices
- Connecting Amplifiers or Other Equipment (OUTPUT [L/MONO], [R] jacks)
- Connecting a Microphone (MIC [INPUT] jack, MIC [GAIN] knob)
- Using a Pedal ([FOOT PEDAL] jack)
- Connecting a USB Flash Drive (USB [TO DEVICE] terminal)
- Connecting to a Computer (USB [TO HOST] terminal)
- Using the “HD-300 Assistant” iPhone/iPad App (Bluetooth)
- Listening on the HD-300 to Audio Playback from an iPhone/ iPad (Bluetooth)
- Appendix
Demonstrating Tempo and Rhythm (Metronome, Rhythm Style)
HD-300 Owner’s Manual
24
Metronome (Beat • Tempo Memory)
You can create and save irregular meters by using Beat • Tempo Memory function.
Press the
BEAT • TEMPO MEMORY [MEMORY] button to set the
rhythm style to the “Beat • Tempo Memory” metronome mode. This will
move the cursor to the memory number.
Press the
[BEAT] button to move the cursor to the beat area.
Use the CURSOR [L][R] buttons to move the cursor and edit the memory.
• “M1”–“M8”: Selects between memory numbers while the cursor is on this. Either change this with the [-]/[+] buttons,
or select the number directly by pressing one of the keys (D5 – A5) corresponding to the numbers.
• A single memory can contain irregular meters with up to eight measures. The variable range for the numerator is 1 – 9
for the first measure, and 0 – 9 for the second and subsequent measures. If the numerator is 0, the metronome will not
proceed to the next measure. The variable value for the denominator is 4 or 8.
• There are no special operations required to save or load memories. A memory being edited will be saved automatically.
Selecting a memory number will load it automatically.
• To initialize the contents of the selected memory number, press the [DELETE] button while during editing.
NOTE
• When using Beat • Tempo Memory, the playback position will be underlined.
• Use the “HD-300 Assistant” iOS app (page 35) to create and send irregular meters using the touch screen on the smart device.
Operation is the same as in the simple metronome mode (page 23).
Using Beat • Tempo Memory
Setting the Beat (Irregular Meter)
Adjusting the Metronome Volume
Memory number Playback position