User manual

Quick Guide

AUDIOGRAM 3 Owner’s Manual

Select [VST Connections] from the [Devices] menu.

Windows:

If “Not Connected” is selected in the [Audio Device] ﬁeld, click on the “Not Connected” indication, and

then switch to [ASIO DirectX Full Duplex Driver].

Also set the [Outputs] in the same way, and then close the window.

Mac:

If “Not Connected” is selected in the [Audio Device] ﬁeld, click on the “Not Connected” indication, and

then switch to [USB Audio CODEC].

Also set the [Outputs] in the same way, and then close the window.

Select [Add Track] → [Audio] from the [Project] menu.

The Add Audio Track dialog window appears.

Set the “Count” and “Conﬁguration” parameters, and then click [Add Track].

The added tracks will appear.

You will normally use a stereo track when recording synthesizers, and a monaural track

when recording vocals or guitars.

Recording with maximum quality and minimum noise:

For optimum sound quality with minimum noise, the AUDIOGRAM signal levels should be set as high

as possible without clipping. Check signal levels to be sent to Cubase AI for recording using the

AUDIOGRAM level indicators while the Cubase monitoring button ( ) is turned off. Adjust the chan-

nel LEVEL controls so that the level indicator PEAK LEDs ﬂash only occasionally on the highest input

transients.

NOTE

Monitoring button