User manual

3-27
CHANGING THE ENGINE OIL/
MEASURING THE ENGINE OIL PRESSURE
CHK
ADJ
CAUTION:
WARNING
10. Install:
S engine oil filler cap
S coolant reservoir tank
Refer to “CHANGING THE COOLANT”.
S bottom cowling
Refer to “COWLINGS”.
11. Start the engine, warm it up for several min-
utes, and then turn it off.
EAS00077
MEASURING THE ENGINE OIL PRESSURE
1. Check:
S engine oil level
Below the minimum level mark ! Add the
recommended engine oil to the proper level.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
When the engine is cold, the engine oil will
have a higher viscosity, causing the engine
oil pressure to increase. Therefore, be sure
to measure the engine oil pressure after
warming up the engine.
3. Remove:
S bottom cowling
Refer to “COWLINGS”.
4. Remove:
S oil gallery bolt
1
The engine, muffler and engine oil are ex-
tremely hot.
5. Install:
S oil pressure gauge
1
S adapter
2
Pressure gauge
90890-03153, YU-03153
Oil pressure adapter
90890-03139