User manual

4-7
FRONT WHEEL AND BRAKE DISCS
CHAS
NOTE:
NOTE:
8. Tighten wheel axle pinch bolt
2
, and then
pinch bolt
1
to specified torque.
9. Retighten pinch bolt
2
to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
10. Tap the outer side of the left fork leg with a
rubber mallet to align it with the end of the
wheel axle.
11. Tighten wheel axle pinch bolt
4
, and then
pinch bolt
3
to specified torque.
12. Retighten pinch bolt
4
to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
13. While applying the front brake, push down
hard on the handlebar several times to
check for proper fork operation.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
S After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
S Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
S balancing weight(s)
2. Find:
S front wheel’s heavy spot
Place the front wheel on a suitable balancing
stand.