Owner`s manual

E-17
English
CONTROLS AND THEIR FUNCTIONS
REMOTE CONTROL TRANSMITTER
1 POWER button
This button turns on the power to this system and
switches this system to standby mode alternately.
2 INPUT selector button
This button switches between INPUT 1 and INPUT 2
each time it is pressed. Check the INPUT 1/2 indicator
5 of the center speaker to see which is activated.
3 TEST button
This button is used for speaker balance adjustment.
(For details, refer to page 19.)
4 DSP OFF button
This button switches off the digital sound field
processor (including the Dolby Pro Logic Surround
decoder).
5 PROGRAM selector buttons
These buttons are used for selecting the DSP program.
A: Dolby Pro Logic Enhanced
B: Dolby Pro Logic
C: Concert
D: Sports
E: Mono Movie
Check the PROGRAM indicators 7 of the center
speaker when making the selection.
6 CENTER level (+/–) buttons
Pressing the “+” button raises and pressing the “–”
button lowers the volume level of the center speaker.
7 REAR level (+/–) buttons
Pressing the “+” button raises and pressing the “–”
button lowers the volume level of the rear speakers.
8 SUBWOOFER level (+/–) buttons
Pressing the “+” button raises and pressing the “–”
button lowers the volume level of the subwoofer.
9 VOLUME (+/–) buttons
Pressing the “+” button raises and pressing the “–”
button lowers the volume of the whole system.
444
8
7
POWER
VOLUME
TEST
D
E
BC
A
ENHANCED
CONCERTPROLOGIC
MONO MOVIESPORTS
OFF
DSP
CENTER
REAR
SUBWOOFER
INPUT
AMP
1/2
6
5
1
9
3
2
AV-S7(E)(E/F)1-16 9/11/0 9:36 AM Page E-17