Owner`s manual

E-21
English
Listening to a source with sound
effects by digital sound field
processing (including Dolby Pro
Logic Surround decoding)
1
Press the POWER button.
When the system is turned on, the STANDBY
indicator turns off, and INPUT indicator 1 or 2 lights
up.
2 Press the VOLUME “–” button to lower the volume.
3 Use the INPUT selector button to select the listening
source.
INPUT 1: For playing a TV or VCR
INPUT 2: For playing audio signals from a
CD player or MD player connected to
INPUT 2
4 Play the source.
5 Press the VOLUME “+” button to adjust the volume
to the desired level.
6 Use the PROGRAM selector button to select the
DSP program (A, B, C, D, or E) matching the play
source.
* The PROGRAM selector button on the center
speaker cycles through
A→B→C→D→E→OFF→A when pressed.
* Check the program settings at the PROGRAM
indicator.
7 The volume for all speakers can be adjusted
simultaneously with the VOLUME button.
Notes
●
Program selection can be made for individual input
sources. Once you select a program, it is linked with
the input source selected at that time. So, when you
select the input source next time, the same program
is automatically called.
●
If you prefer to cancel the DSP, press the DSP OFF
button. The sound will be the normal 2-channel
stereo without the surround sound effect.
●
When CONCERT, SPORTS or MONO MOVIE is
selected, no sound is heard from the center
speaker.
●
When a monaural sound source is played with
DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED, sound is heard from the center
speaker and subwoofer.
●
If the AV-S7 system is set to STANDBY or turned
off, the signal applied to INPUT 1 is sent to the
THROUGH terminals of INPUT 1.
USING THE AV-S7
POWER
VOLUME
TEST
D
E
BC
A
ENHANCED
CONCERTPROLOGIC
MONO MOVIESPORTS
OFF
DSP
CENTER
REAR
SUBWOOFER
INPUT
AMP
1/2
3
1
5
6
2
PRO LOGIC
PRO LOGIC ENHANCED
OFF
CONCERT
MONO MOVIE
SPORTS
Press the PROGRAM selector button on the center
speaker to select the programs shown below.
AV-S7(E)17-24 9/11/0 9:07 AM Page E-21