Owner`s manual

15
Tutorial
5
Press the MIXER section [DYN] key to
access the dynamics parameters.
6
Press the DYN button, and then press the
[F2] key located below the screen.
In this screen, load a library whose TYPE field is
displayed as “EXP.” Move the cursor to “ON/
OFF” and turn dynamics “ON” for the selected
track.
7
Use the CURSOR keys and the [DATA/JOG]
dial to make the following dynamics set-
tings.
DYNAMICS Expander
■ Channel 7: Percussion
For the percussion channel, we will cut the 125 Hz
region by –8.0 dB to reduce the weight of the low
range, making the sound a bit lighter. In the dynamics
section, we will use a compander to increase the per-
ceived loudness to compensate for the reduction in
the low range.
EQ (ATT –7 dB)
Type Compander soft
Threshold Ratio Out Gain Attack Release Knee
–14 dB 3.5:1 3.5 dB 0 ms 70 ms 2
LOW L-MID H-MID HIGH
Q L.SHELF 0.50 — —
F 125 Hz 1.00 kHz — —
G –8.0 dB 1.0 dB 0.0 0.0
Threshold Ratio Out Gain Attack Release Width
–13 dB 3:1 0.0 dB 14 ms 87 ms 1 dB