Owner`s manual

95
Chapter
Transport/Locate operations
6
Operation section
6
Transport/Locate operations
This chapter explains transport and locate operations on the AW2816.
Transport key functions
Transport operations for the recorder are performed
using the five keys of the Transport section (the trans-
port keys). The function of each transport key will
change depending on the current state (running
mode) of the transport. The following chart shows the
function of each transport key in each running mode.
* : Recording will be executed only if one or more of the REC TRACK SELECT [1]–[16]/[ST] keys are blinking.
– : Key does nothing.
Transport operations and Locate operations cannot be
performed when the SONG, FILE, CD, or EDIT
screens are shown in the display.
Fast forward-play/Fast reverse-play
(the Shuttle function)
While the transport is stopped or playing, you can
operate the [SHUTTLE] dial to play fast-forward (cue)
or play in reverse (review). This is referred as the
“Shuttle function.”
The speed of cue or review will change according to
the angle of the [SHUTTLE] dial, as shown in the illus-
tration at right. When the [SHUTTLE] dial is returned
to the center, the Shuttle function is defeated, and the
transport will return to the previous state (stopped or
playing).
Running mode /
Transport key
Stopped Playing Rewinding
Review
(rewind-play)
Fast-
forward
Cue
(play-fast-forward)
Recording
— Stop Stop Stop Stop Stop Stop
Play back — Play back Play back Play back Play back
Play back
(punch-out)
Rewind
(8x speed)
Review
(8x speed)
Switch
rewind speed
(8x ⇔ 16x)
Switch review
speed
(8x ⇔ 16x)
Rewind
(8x speed)
Review
(8x speed)
—
Fast-forward
(8x speed)
Cue
(8x speed)
Fast-forward
(8x speed)
Cue
(8x speed)
Switch fast-
forward speed
(8x ⇔ 16x)
Switch cue
speed
(8x ⇔ 16x)
—
Record*
Record*
(punch-in)
Play back Play back Play back Play back —
+
Forward
Stop
+8
+16
–8
+4
–4
+2
–2
+1(normal speed)
–1
+1/2–1/2
+1/4–1/4
Backward
–16