Owner`s manual

Editing tracks and virtual tracks
110
Chapter
7
Operation section
7
Use the character palette to input the new
track name.
A track name of up to sixteen characters can be
input. For details on inputting characters, refer to
page 37.
Tip!
The TRACK page displays the first eight characters of
the track name.
8
To confirm the new track name, move the
cursor to the OK button and press the
[ENTER] key.
To cancel the change, move the cursor to the
CANCEL button and press the [ENTER] key.
Editing a region name
1
Press [EDIT] key → [F1] (TR Edit) key.
The EDIT screen TR Edit page will appear.
2
Move the cursor to the REGION menu and
press the [ENTER] key.
The editing commands in the REGION menu will
be listed.
3
Move the cursor to the NAME command
button and press the [ENTER] key.
A button for setting the parameters of the NAME
command will appear.
4
Move the cursor to the REGION parameter
button and press the [ENTER] key.
The name of the currently selected region
(NAME) and the start and end locations of the
region (FROM/TO) will be displayed in the
parameter area at the lower right of the display.
5
Use the CURSOR [ ]/[ ]/[ ]/[ ] keys
to select a region, and press the [ENTER]
key.
The NAME EDIT popup window will appear,
allowing you to assign a name to the region.
6
Move the cursor to the NAME parameter
button, and press the [ENTER] key.
The NAME EDIT popup window will appear,
allowing you to assign a name to the region.
7
Use the character palette to input the new
region name.
A region name of up to eight characters can be
input. For details on inputting characters, refer to
page 37.
8
To confirm the new region name, move
the cursor to the OK button and press the
[ENTER] key.
To cancel the change, move the cursor to the
CANCEL button and press the [ENTER] key.