Owner`s manual

Managing songs
156
Chapter
10
Operation section
Importing tracks from an existing song
Desired tracks of audio data can be imported (loaded)
from an existing song into the current song. This is
convenient when you want audio materials recorded
in another song to be reused in the current song.
1
Load the import destination song as the
current song.
2
Press the [EDIT] key → [F5] key.
The TR Import page will appear, in which you
can import tracks from an existing song.
The upper part of the display will list the songs
that are currently saved on the internal hard disk.
The row that is highlighted in the list is the cur-
rent song, and the row enclosed in a dotted
frame is currently selected as the import source.
Each column of the list displays the following
information.
• DEST.SONG NAME......Song name (the first
sixteen characters)
• SAVED AT.......... The date and time at which
the song was last saved
• SIZE................... The size of the song
• BIT/FS ............... The number of bits and sam-
pling frequency of the song
• PRT ................... Protect on/off status
3
Move the cursor to the list, and turn the
[DATA/JOG] dial to select the import
source song.
4
Move the cursor to the LOAD button and
press the [ENTER] key.
A popup window will ask you for confirmation.
5
Move the cursor to the OK button and
press the [ENTER] key.
Track information of the selected song will be
loaded, and the SOURCE TRACK area like the
following will appear.
6
Move the cursor to the SOURCE TRACK
area, and specify the track number (1–16)
and virtual track number (1–8) of the track
that you want to import.
7
Move the cursor to the TRACK CLIP button
and press the [ENTER] key.
A popup window will ask you for confirmation.
8
Move the cursor to the OK button and
press the [ENTER] key.
The track specified in the SOURCE TRACK area
will be finalized as the import source, and a dis-
play like the following will appear.
Once the import source track has been finalized, it
will not be possible to change the track in the
SOURCE TRACK area. If you want to change the
import source track, move the cursor to the song list
and turn the [DATA/JOG] dial. Select the OK button
in the popup window that asks for confirmation, and
you will return to step 2.
9
Move the cursor to the DEST. TRACK area,
and specify the track number (1–16) and
virtual track number (1–8) of the import
destination track.