Owner`s manual

Before you begin
12
Operation section
Turning the power off
When turning off the power of a system that includes
the AW2816, each device must be turned off in the
following order.
1 The monitor system connected to the output
jacks or the AW2816
B The AW2816 itself
C Any storage devices connected to the SCSI
connector of the AW2816, and external tone
generators connected to the input/output
jacks
When turning off the power of the AW2816 itself, you
must use the shutdown procedure described below.
1
In the WORK NAVIGATE section located on
the top panel of the AW2816, press the
[SONG] key.
2
Press the [F5] (SHUT DOWN) key located
below the display.
3
Press the [ENTER] key.
A message will ask you whether you want to save
the current song.
4
Use the CURSOR keys located in the right
center of the top panel to move the cursor
to the OK button, and press the [ENTER]
key.
5
When a message of “Now safe to turn off”
appears, turn off the [POWER] switch of
the rear panel.
• If you turn off the power of the AW2816 without
using the above shutdown procedure, the data on
the hard disk may be damaged.
• Never turn off the power while the access indicator
which indicates the access status of the internal hard
disk is lit. Doing so may damage the hard disk itself.