Owner`s manual

Other functions
224
Chapter
14
Operation section
Copying attenuator settings to all channels
Here’s how attenuator settings can be copied from
one channel to all channels (except the stereo output
channel).
1
Use the [SEL] keys to select the copy source
channel, and press the [EQ] key → [F1]
(EQ/ATT) key.
The EQ/ATT/GRP screen/EQ/ATT page will
appear.
2
Move the cursor to the ATT. area.
3
Press the [SHIFT] key + [F5] (COPY ATT. TO
ALL) key.
A popup window will ask you to confirm the
copy operation.
4
Move the cursor to the OK button and
press the [ENTER] key.
The copy will be executed, and the same attenu-
ator setting will be copied to all channels except
the stereo output channel.
If you copy to paired channels, the same attenuator
settings will be copied to both channels.