Owner`s manual

239
Reference section
H TOP
This sets the time code location that corresponds
to the beginning of the song (Time Code Top).
Move the cursor to the TOP area, and use the [ ]/
[ ] keys and the [DATA/JOG] dial to adjust the
hours/minutes/seconds/frames/subframes value.
The range is “00:00:00:00.00”–“24:00:00:00.00”
(it is not possible to specify a negative value).
• When you change the Time Code Top, it will affect
both the time code display in the screen as well as
the MTC that is transmitted and received.
• When the Time Code Top is changed, the location of
the Start Point and End Point will automatically be
moved forward or backward. For the Start Point/End
Point, refer to the Track screen/Mark Adj. page
(
→ P.327).
I RGN. FADE TIME (Region Fade Time)
This adjusts the time over which fade-in/fade-out
will occur at the beginning and end of a region
(Region Fade Time). The range is 3, 5, 10, 20, or 45
(msec), and the default setting is 5 msec.
Tip!
If the level changes abruptly at the start or end of a
region, a click or pop may be heard during playback. If
this occurs, you can increase the Region Fade Time.
Tip!
The settings in this page are saved on the internal hard
disk as part of the current song. After you modify these
settings, save the current song as necessary.
Time code display
Time display
Song
00:00:00:00.00 00:00:05:00.00
00:00:00:000 00:00:05:000
00:00:10:00.00
00:00:10:000
Time code top = 00:00:00:00.00
Time code top = 00:00:
05:00.00
Time code display
Time display
Song
00:00:05:00.00 00:00:10:00.00
00:00:00:000 00:00:05:000
00:00:15:00.00
00:00:10:000
SONG screen