Owner`s manual

FILE screen
246
Reference section
Restore page
Reload backed-up song data
Function
In this page, song data can be reloaded
(restored) from an internal/external
CD-RW drive or external SCSI device
back into the internal hard disk of the
AW2816.
Key operation
• [FILE] key → [F2] (Restore) key
• Repeatedly press the [FILE] key until
the screen shown at the right appears.
Screen functions
A Song list
This is a list of the songs saved on the backup
internal CD-RW drive or external SCSI device. The
song enclosed by the dotted line is currently
selected.
In the RESTORE column, the “
●” symbol indicates
a song that has been selected for restore, and the
“” symbol indicates a song that has been
excluded from the restore operation.
The song list displays the following information.
• SONG NAME ...... Song name (however, only
the first 12 characters)
• SAVED AT............ Date and time at which the
song was last saved
• SIZE..................... Size of the song
• BIT/FS ................. Number of quantization bits/
sampling frequency of the
song
• PRT...................... Song protect (→P.238) on/off
status
B RESTORE SONG button
This button switches the song currently selected in
the song list between Selected for restore
(ENABLE) or Excluded from the restore operation
(DISABLE).
When you move the cursor to this button and
press the [ENTER] key, the symbol in the RESTORE
column (
● or ) will alternate for the currently
selected song.
C ALL ENABLE button
If you move the cursor to this button and press the
[ENTER] key, all songs will be selected for restore.
D ALL DISABLE button
If you move the cursor to this button and press the
[ENTER] key, all songs will be excluded from the
restore.
E SOURCE
Select the drive from which the data will be
restored. Move the cursor to this field and use the
[DATA/JOG] dial to select a SCSI ID number
(external SCSI device/external CD-RW drive) or
“ATAPI” (internal CD-RW drive), and press the
[ENTER] key to confirm your selection.
F DESTINATION
This shows the restore destination drive (internal
hard disk). This item is for display only, and cannot
be modified.
G EXECUTE button
When you move the cursor to this button and
press the [ENTER] key, a popup window will ask
you to confirm the operation. Move the cursor to
OK and press the [ENTER] key to begin the restore
operation.
Tip!
• Song data backed up on the upper-level model
AW4416 can be restored to the AW2816, but only
the audio data of each track will be restored.
• For details on the Restore procedure, refer to
page 164.
4
3
7
6
1
2
5