Owner`s manual

272
Reference section
MIDI screen
MIDI Setup 1 page
Basic MIDI settings (1)
Function
Make settings for MIDI transmit/
receive channels, turn message recep-
tion on/off, and make MIDI synchroni-
zation settings.
Key operation
• [MIDI] key → [F1] (MIDI Setup 1) key
• Repeatedly press the [MIDI] key until
the screen shown at the right appears.
Screen functions
A PROGRAM CHANGE
Use the following buttons to make transmission/
reception settings for program change messages.
• TX (transmission) ... Turns program change trans-
mission on/off. When this
button is on, recalling a
scene on the AW2816 will
cause the program change
assigned to that scene num-
ber to be transmitted.
• RX (reception)..... Turns program change recep-
tion on/off. When this button
is on, receiving a program
change will cause the
AW2816 scene assigned to
that program change number
to be recalled.
• OMNI.................. When this button is on, pro-
gram changes on all MIDI
channels will be received,
regardless of the Rx CH
(Receive MIDI channel).
• ECHO
....................When this button is on, the
identical message will be re-
transmitted from the MIDI OUT/
TO HOST connectors when a
program change is received.
Tip!
The scene number assigned to each program change
number 1–128 can be changed in the MIDI screen
PGM Asgn. page.
B CONTROL CHANGE
Use the following buttons to make transmission/
reception settings for control change messages.
• TX (transmission) ... Turns control change trans-
mission on/off. When this
button is on, operating a
parameter on the AW2816
will cause the control change
message assigned to that
parameter to be transmitted
from the MIDI OUT/TO
HOST connector.
• RX (reception)..... Turns control change recep-
tion on/off. When this button
is on, receiving a control
change will cause the
AW2816 parameter assigned
to that control change num-
ber to be modified.
• OMNI.................. When this button is on, con-
trol changes on all MIDI
channels will be received,
regardless of the Rx CH
(Receive MIDI channel).
• ECHO.................. When this button is on, the
identical message will be re-
transmitted from the MIDI
OUT/TO HOST connector
when a control change mes-
sage is received.
Tip!
A parameter can be assigned to each control change
number in the MIDI screen CTL Asgn. page.
1
2
3
4
5
6
8
9
J
K
7