Owner`s manual

289
Reference section
L ASSIGN button
This button patches the input/output of an internal
effect, or the input/output channel of a desired
input/output jack or I/O card, to the insert send/
return of this channel. Use this when you want to
insert an internal effect or external effect into the
signal route of this channel.
When you move the cursor to this button and
press the [ENTER] key, the following popup win-
dow will appear.
The various areas of the popup window have the
following functions.
• OFF button
When this button is highlighted, nothing will be
patched to the insert send/return of this channel.
• INT.EFF 1 (Internal effect 1) button
When this button is turned on, the input/output of
internal effect 1 will be patched to the insert send/
return of the corresponding channel.
• INT.EFF 2 (Internal effect 2) button
When this button is turned on, the input/output of
internal effect 2 will be patched to the insert send/
return of the corresponding channel.
• In order to insert an internal effect 1/2 into a chan-
nel, you must first set the EFFECT PATCH field EFF1/
EFF2 parameter to “INSERT” in the PATCH screen
Patch IN page. If this parameter is not set to
“INSERT,” it will not be possible to turn on the
INT.EFF 1/INT.EFF 2 button.
• It is not possible to insert the same internal effect
into multiple channels. For example even in the case
of paired channels, if internal effect 1 or 2 is patched
to one channel, it will not be possible to patch the
same internal effect into the other channel.
• EXTERNAL button
When this button is turned on, the input/output
connector/input/output channel selected in the
SEND/RTN. field will be patched to the input
send/return of the corresponding channel.
• SEND
When the EXTERNAL button is on, select one of
the following choices as the output jack/output
channel that will be patched to the insert send.
■ For an input channel/monitor channel
■ For a return channel/stereo output channel
• RTN. (Return)
When the EXTERNAL button is on, select one of
the following choices as the input jack/input chan-
nel that will be patched to insert return.
■ For an input channel/monitor channel
■ For a return channel/stereo output channel
• An external effect can be inserted into multiple chan-
nels. (However, it is not possible for the same input/
output jack/input/output channel to be shared by the
insert send/return of multiple channels.)
• If you want to insert an external effect into two
paired channels, you must make insert send/return
settings independently for each channel.
Tip!
• For the procedure of inserting an internal effect into
a desired channel, refer to page 88.
• For the procedure of inserting an external effect into
a desired channel, refer to page 78.
Display Meaning
OMNI 1–OMNI 4 OMNI OUT jacks 1–4
SLT-1 – SLT-8
OPTION I/O slot output chan-
nels 1–8
D STO L/D STO R
L or R channel of the DIGITAL
STEREO OUT jack
ST OUT L/ST OUT
R
L or R channel of the STEREO
OUT jack
Display Meaning
OMNI 1/2 – OMNI
3/4
OMNI OUT jacks 1/2–3/4
SLT-1/2 – SLT-7/8
OPTION I/O slot output chan-
nels 1/2–7/8
D ST OUT
DIGITAL STEREO OUT jack (L/
R)
ST OUT STEREO OUT jack (L/R)
Display Meaning
AD 1 – AD 8 INPUT 1–8 jacks
SLT-1 – SLT-8
OPTION I/O slot input chan-
nels 1–8
D STIN L/D STIN R
L or R channel of the DIGITAL
STEREO OUT jack
Display Meaning
AD 1/ 2– AD 7/8 INPUT 1/2–7/8 jacks
SLT-1/2 – SLT-7/8
OPTION I/O slot input chan-
nels 1/2–7/8
DSTI L/R DIGITAL STEREO IN jack (L/R)
VIEW screen