Owner`s manual

295

Reference section

Pair page

Set pairing of channels/buses

Function

Set/defeat pairing for input channels 1–

8, monitor channels 1–16, buses 1–8,

and AUX buses 1–4.

Key operation

• [PAN] key → [F3] (Pair) key

• Repeatedly press the [PAN] key until

the screen shown at the right appears.

Screen functions

A Channel/Bus

This area indicates the channel/bus for which pair-

ing will be set/defeated.

B Pairing

Move the cursor to a button in this area and press

the [ENTER] key to set/cancel pairing for adjacent

odd-numbered → even-numbered channels or

buses. When pairing is set, the heart symbol will

be connected, and the button will indicate “STE-

REO.” When pairing is cancelled, the heart symbol

will be divided, and the button will indicate

“MONO x 2.”

Tip!

• For paired channels, all mix parameters other than

phase, pan and effect insert settings will be linked.

• For buses that are paired, the master level (HOME

screen/Bus page) will be linked.

• For AUX buses that are paired, the master level

(HOME screen/Bus page) and the send level of the

signals sent from each channel to the corresponding

AUX bus will be linked.

PAN/ROUTE screen