Owner`s manual

EQ/ATT/GRP screen
298
Reference section
Library page
Store/recall EQ settings
Function
Store EQ settings in the EQ library, or
recall the stored settings.
Key operation
• [EQ] key → [F2] (Library) key
• Repeatedly press the [EQ] key until
the screen shown at the right appears.
Screen functions
A SEL CH (Select channel)
This indicates the channel that is currently
selected by its [SEL] key. The abbreviations have
the following meaning.
• INPUT 1–8 .......... Input channel 1–8
• MONI 1–16......... Monitor channel 1–16
• RTN 1/2 .............. Return channel 1/2
• ST OUT ............... Stereo output channel
B CURRENT EQ CURVE
This graph indicates the approximate response of
the EQ for the selected channel.
C Output meter
This meter indicates the signal level after passing
through the EQ.
D TITLE EDIT button
This button edits the name (library title) of the EQ
settings stored in the library. When you move the
cursor to this button and press the [ENTER] key, a
TITLE EDIT popup window will appear, allowing
you to edit the library title.
Library numbers 1–40 are recall-only preset memories,
and their names cannot be changed. Numbers in
which no EQ program has been stored are displayed as
“No Data!,” and their title cannot be changed.
E RECALL button
This button recalls the EQ settings currently
selected in the library list.
Library numbers in which no EQ settings have been
stored will be displayed as “No Data!,” and cannot be
recalled.
F STORE button
This button stores the current EQ settings into the
number selected in the library list. If EQ settings
have already been stored in that number, they will
be overwritten by the new EQ settings.
It is not possible to store into the recall-only library
numbers 1–40.
G Library list
This displays the EQ library list. The row enclosed
by a dotted line indicates the library number that
is currently selected by the [DATA/JOG] dial. The
columns of the list display the following informa-
tion.
• NO...................... The library number 1–128.
• LIBRARY TITLE .... The library title. If no data has
been stored, this will indicate
“No Data!”
• ROM ................... Recall-only EQ settings are
indicated by the “” sym-
bol.
H EQ CURVE
This graph indicates the approximate response of
the EQ settings currently selected in the library list.
1
4
5
6
7
8
32