Owner`s manual

313
Reference section
Pre/Pst page
Turn effect send on/off, and switch between pre/post
Function
In this page, the signal sent from the
input channels, return channels, and
monitor channels to internal effects 1/2
(AUX buses 5/6) can be switched on/off
and between pre-fader/post-fader.
Key operation
• [AUX 5] key/[AUX 6] key → [F3] (Pre/
Pst) key
• Repeatedly press the [AUX 5] key or
[AUX 6] key until the desired page
appears.
Screen functions
A Channels
This area displays the channels that can be edited.
For paired channels, a “–” symbol is displayed
between the channel numbers. The abbreviations
have the following meanings.
• INPUT 1–8 .......... Input channels 1–8
• REC MONI 1–16 ... Monitor channels 1–16
• RTN1/RTN2 ........ Return channels 1/2
• It is not possible to send signals from return channel
1 to effect 1 (AUX bus 5), or from return channel 2
to effect 2 (AUX bus 6). This is in order to prevent a
loop from occurring between return channels and
effects.
• Due to the reason described above, return channel 1
(return channel 2) will not be displayed in the AUX5/
EFF1 screen (AUX6/EFF2 screen).
B PRE/POST buttons
These buttons select either the pre-fader signal or
the post-fader signal as the source of the signal
that is sent from each channel to the correspond-
ing internal effect.
C ON/OFF buttons
These buttons are on/off switches for the signal
that is sent from each channel to the correspond-
ing effect send.
D Send level
This indicates the send level for each channel. Use
the faders for each channel (1–8) to adjust the
send level.
Tip!
You can also use the [SEL] keys to select a channel.
E Output meter
This indicates the output level of the AUX buses 5/
6.
F GBL (Global)
Use the PRE button or POST button to switch all
channels between pre-fader/post-fader.
■ Additional functions in the Pre/Pst
page
In the Pre/Pst page, you can press the [SHIFT] key to
assign the following functions to the [F1]–[F2] keys.
• [F1] (GLOBAL PRE) key
Sets all channels to pre-fader. This is the same
function as the PRE button in the GBL area (6).
• [F2] (GLOBAL POST) key
Sets all channels to post-fader. This is the same
function as the POST button in the GBL area (6).
43 2
6
1
5
AUX5/EFF1, AUX6/EFF2 screens