Owner`s manual

321
Reference section
Option page
Monitor the output levels of the I/O card
Function
Display meters that indicate the output
levels to an I/O card installed in the
option I/O slot.
Key operation
• [HOME] key → [F4] (Option) key
• Repeatedly press the [HOME] key
until the screen shown at the right
appears
Screen functions
A Level meters
These level meters indicate the output levels of the
I/O card. The type of signal assigned to each out-
put channel 1–8 is displayed below the level
meters.
Tip!
This page is for display only, and contains no editable
items. The type of signal assigned to each output chan-
nel of the I/O card can be changed in the PATCH
screen/Patch OUT page.
B STEREO OUT LEVEL
The position of the STEREO fader is shown in dB
units.
■ Additional functions in the Option
page
In the Option page you can press the [SHIFT] key to
assign the following function to the [F1] key.
• [F1] (PEAK HOLD) key
Switches the Peak Hold function on/off. When
peak hold is on, a “” symbol indicating the
peak level will be maintained in the level meters
(1). The peak hold setting also affects the level
meters displayed in pages other than in the EQ/
ATT/GRP screen and the DYN/DLY screen.
1
2
HOME screen