Owner`s manual
EDIT screen
330
Reference section
Tip!
• It is possible to move the cursor to the (
4
) area only
if the three menus TRACK/PART/REGION are dis-
played.
• The pairing settings you make in this page are linked
with the TRACK screen/V.Track page.
E T (Track)
This column displays the track number 1–16.
F NAME
This column displays the name of the virtual track
currently selected for each track 1–16. Tracks in
which nothing has been recorded are displayed as
“-NO REC-”. When you record something on such
a track, it will automatically be assigned a name of
“V.Tr x-y” (x= track number 1–16, y= virtual track
number 1–8).
Tip!
A name of up to 16 character can be assigned to a vir-
tual track, but only the first 8 characters will be dis-
played in the NAME column (
3
).
G V (virtual track)
This shows the virtual track number (1–8) that is
currently selected for each track 1–16.
Tip!
Virtual tracks are selected in the TRACK screen/
V.Track page.
H Track view
In this area, the regions included in each track are
displayed as a bar graph. The vertical line in the
track view area indicates the location at which the
area for editing has been set. The symbols dis-
played at the bottom of the track view area indi-
cate locate points and markers.
While editing, the track and area selected for edit-
ing will be displayed as follows.
When you specify an editing source and editing
destination track/range (e.g., when copying or
moving audio data), the display will be as follows.
I Parameter setting area
In this area you can set the parameters for execut-
ing the selected command.
Tip!
• For details on track editing operations, refer to
page 111.
• If markers or locate points have been set within the
song, you can use the [ ]/[ ] keys, LAST REC
[IN]/[OUT] keys, and [A]/[B] keys to specify the edit-
ing location or editing range.
The keys of the transport section will have no effect
while the TR Edit page is displayed.
■ Additional functions in the TR Edit
page
In the TR Edit page you can press the [SHIFT] key to
assign the following additional functions to the [F1]–
[F3] keys.
• [F1] (REMAIN) key
Displays the remaining recordable time (hours:
minutes) in the counter located in the upper part
of the display. Hold down the [SHIFT] key and
press the [F1] key once again to return to the nor-
mal counter display.
• [F2] (X-ZOOM IN) key
Each time you press the [SHIFT] key + [F2] (X-
ZOOM IN) key, the track view 8 will zoom-in on
the time axis in four levels.
• [F3] (X-ZOOM OUT) key
Each time you press the [SHIFT] key + [F3] (X-
ZOOM OUT) key, the track view 8 will zoom-out
on the time axis in fout levels.
Track to be edited Edited area
Edit source track
Edit destination track
Edit source area
Edit destination area