Owner`s manual

393
Appendix
Appendix
MAKE NEW MIX.
There are no events to be edited. Please create a new mix.
MARK ERASED
The mark has been erased.
MARK SET
The mark has been set.
MEMORY FULL!!
The song has no more free space. One song can use a maximum of
6.4 GB.
MIDI BULK RECEIVED
A bulk data dump was received.
MIDI IN: DATA FRAMING ERROR!
Invalid data may have been received at the MIDI IN connector.
MIDI IN: DATA OVERRUN!
Invalid data may have been received at the MIDI IN connector.
MIDI: RX BUFFER FULL!
Receiving more MIDI data than it can handle.
MIDI: TX BUFFER FULL!
Attempting to transmit more MIDI data than it can handle.
NO CURRENT AUTOMIX.
There is no valid automix data. Please create a new mix.
NO DATA TO PATCH
No Quick Rec patch has been specified.
NO DATA TO RECALL.
Since data has not been stored, it cannot be recalled.
NO MARK LEFT
The allowable number of marks has been exceeded.
NO MEDIA!!
Media has not been inserted.
NO PATCH CORD LEFT
You attempted to patch in excess of what is allowed by Quick Rec.
PLAY TRACK MUTE IS ON
Playback tracks were muted because the allowable number of simul-
taneously recorded/played tracks was exceeded.
RECORDER BUSY
The operation cannot be executed because the recorder is operating.
RECORDER RUNNING
The operation cannot be executed because the recorder is recording
or playing.
REDO COMPLETE
Redo (re-execution of the previous operation) has been completed.
REPEAT POINTS TOO CLOSE
The repeat interval is too short. It cannot be set to less than one sec-
ond.
SELECTED ALL TRACKS
Since all tracks are selected, it is not possible to export to CD-R/RW
media, or to edit the track name.
SELECTED AREA HAS NO DATA.
The selected area contains no trigger data.
SELECTED AREA HAS NO REGION.
The selected area contains no region.
SELECTED CH IS NONE.
The selected channel cannot be selected since it does not exist.
SELECTED CH ONLY MODE.
The channel cannot be changed, since the display mode is set to
SELECTED CH ONLY.
SELECTED SONG HAS NO REGION.
The selected song does not contain a region.
SELECTED TRACK HAS NO REGION.
The selected track does not contain a region.
SELECTED TRACK NOT RECORDED.
The selected track does not contain recorded data.
SLOT INPUT SYNC ERROR!
The signal being input to the input jack of a card installed in OPTION
I/O slot is not synchronized to the word clock master.
SOLO READY.
The Solo function is ready. Use the [SEL] keys to select the solo chan-
nel.
SOLO SLAVE.
The Solo status cannot be changed when the AW2816 is functioning
as a cascade slave. Press the Solo key on the master console.
SONG NUMBER FULL.
The maximum number of songs has been reached.
SONG TOP/END OUT OF RANGE
You located outside the top/end range of the song.
STEREO PAIRED.
You are attempting to defeat ST LINK for the dynamics of paired chan-
nels.
STEREO TRACK MUTE IS OFF
Since muting is off for the stereo track, track muting cannot be turned
off.