Owner`s manual

ManualsBrandsYamaha ManualsMusic MixerAW2816

Welcome to the world of the AW2816

Operation section

Stereo output channel

This is a stereo output channel that processes the sig-

nals sent from each channel to the stereo bus. It pro-

vides a 4-band EQ and dynamics processor identical

to those provided on the input channels. The output

signal of the stereo output channel is sent via the out-

put patch section to the various output jacks, and is

also simultaneously output to the MONITOR OUT

jacks and PHONES jack.

When you use an internal or external CD-RW drive to

play back an audio CD, the CD audio signal is

patched to the pre-fader location of the stereo output

channel.

Buses 1–8

The signals sent from each channel to buses 1–8 pass

through a master level, and are sent to the output

patch section. The master level of buses 1–8 is con-

trolled in the HOME screen Bus page.

AUX buses 1–6

The signals sent from each channel to AUX buses 1–6

pass through a master level, and are sent to the output

patch section. The master level of AUX buses 1–6 is

controlled in the HOME screen Bus page.

Tip!

With the AW2816’s default settings, the output of

AUX buses 5/6 is sent to the output patch section, and

also assigned to the input of internal effects 1/2.

STEREO

ATT

INSERT

4BAND EQ

CD PLAY mode

CD-RW DRIVE

LEVEL

CD PlayBack

ON BAL

METER

DY-

NAMICS

DY-

NAMICS

(EQ)

(EQ) (Gain Reduction)

STEREO L

STEREO R

SOLO L

SOLO R

AUX 1

AUX 4

AUX 5(EFF1)

AUX 6(EFF2)

...

OUTPUT PATCH

BUS 1(...8)

AUX1(...6)

LEVEL

METER

BUS 1

BUS 2

BUS 3

BUS 4

BUS 5

BUS 6

BUS 7

BUS 8