Owner`s manual
Input/output patching
78
Chapter
4
Operation section
Inserting an external effect into a channel
You can patch input/output jacks into an insert I/O
point of a desired channel, and insert an external
effect. For example this method can be used when
you want to apply a studio chorus effect while record-
ing a guitar, or when you want to apply an external
compressor/limiter on the stereo bus signal during
mixdown.
1
Use the keys of the MIXING LAYER section
and the [SEL] keys to select the desired
channel.
2
Press the [VIEW] key → [F1] (CH View) key.
The VIEW screen CH View page will appear. In
this example, we have selected monitor channel
1.
3
Move the cursor to the ASSIGN button of
the EFFECT INSERT area, and press the
[ENTER] key.
The EFF.INSERT SETTING popup window will
appear. This window lets you insert an internal
effect or external effect into the selected channel.
4
Move the cursor to the EXTERNAL button,
and press the [ENTER] key.
The SEND area and RTN. area of the popup win-
dow will show the type of input/output jack or
input/output channel that is patched.
Tip!
By using the INT.EFF 1 button or INT.EFF 2 button of
the EFF.INSERT SETTING popup window, you can
insert internal effect 1/2 into that channel. For details
refer to page 88.
5
Move the cursor to the SEND area, and use
the [DATA/JOG] dial to select the output
jack or output channel that you want to
assign as the insert send.
The following types of jack can be selected.
• If an input channel 1–8 or a monitor channel 1–
16 is selected
• If a return channel 1/2 or the stereo output
channel is selected
Display Content
OMNI 1–OMNI 4 OMNI OUT 1–4 jacks
SLT 1–SLT 8
Output channels 1–8 of the
OPTION I/O slot
D STO L/D STO R
L or R channel of the DIGITAL
STEREO OUT jack
STOUT L/STOUT
R
L or R channel of the STEREO
OUT jacks
Display Content
OMNI 1/2–OMNI
3/4
OMNI OUT 1/2–3/4 jacks
SLT 1/2–SLT 7/8
Output channels 1/2–7/8 of the
OPTION I/O slot
D STOUT DIGITAL STEREO OUT jack (L/R)
STOUT STEREO OUT jacks (L/R)