Owner`s manual
Using the internal effects
5
89
Operation section
3
Move the cursor to the ASSIGN button of
the EFFECT INSERT area, and press the
[ENTER] key.
The EFF.INSERT SETTING popup window will
appear. In this popup window you can use the
following four buttons to select the to insert
effect.
• OFF................... Cancel effect insertion.
• INT.EFF1 ........... Insert effect 1.
• INT.EFF2 ........... Insert effect 2.
• EXTERNAL......... Insert an external effect.
4
To insert effect 2, move the cursor to the
INT.EFF2 button, and press the [ENTER]
key.
The SEND area in the popup window will
change to “EFF2,” and the RTN. area will change
to “EFF 2L.” This indicates that the input of effect
2 is patched to the insert send of monitor channel
1, and the L output of effect 2 is patched to the
insert return.
Tip!
• By moving the cursor to the RTN. area and turning
the [DATA/JOG] dial, you can switch between “EFF
2L” and “EFF 2R.”
• If you insert an effect into a stereo channel (return
channel 1/2 or the stereo output channel), the L/R
outputs of the effect will be returned to the L/R
inputs of the channel.
5
When you have finished making settings,
move the cursor to the OK button and
press the [ENTER] key.
The popup window will close, and the EFFECT
INSERT area will indicate “ON [INT.EFF2].” This
means that that effect 2 is inserted into the corre-
sponding channel (in this example, monitor
channel 1).
Tip!
To cancel the insertion, turn on the OFF button in the
EFF.INSERT SETTING popup window. Also, a popup
window asking you to confirm cancellation of the
insertion will appear if you insert effect 2 into
another channel.
Recalling an effect program
Here’s how to recall an effect program for use by
effect 2.
1
Press the [AUX 6] key → [F2] key.
The AUX6/EFF2 screen Library page will appear.
2
Use the [DATA/JOG] dial to select the effect
program that you want to recall.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
The selected program will be recalled to effect 2.
4
Press the [F1] key.
The Eff.Edit page will appear.
5
Move the cursor to the MIX BAL. knob,
and turn the [DATA/JOG] dial to adjust the
balance between the original sound and
the effect sound.
When you insert an internal effect into a specific
channel, use the Eff.Edit page MIX BAL. knob to
adjust the balance between the original sound
and the effect sound. Adjust this setting to an
appropriate level as necessary.