User Guide

Editing tracks and virtual tracks
7
115
Operation section
Tip!
If you want to select a different editing command,
move the cursor to the highlighted edit command but-
ton, and press the [ENTER] key.
4
Move the cursor to the REGION parameter
button, and press the [ENTER] key.
The parameter setting area will show the name of
the currently selected region, and the starting
location (FROM) and ending located (TO) of that
region.
5
Use the CURSOR [ ]/[ ]/[ ]/[ ] keys
to select the region that you want to edit.
Use the CURSOR [ ]/[ ] keys to move between
tracks (1–16), and use the CURSOR [ ]/[ ]
keys to select one of the regions included in that
track.
6
Press the [ENTER] key.
The region to be edited will be finalized, and you
will return to step 3 (parameter selection).
Repeat steps 4–6 as necessary to set the other
parameters in the same way.
7
Move the cursor to the EXECUTE button
and press the [ENTER] key.
A popup window will ask you to confirm execu-
tion of the editing operation.
8
To execute, move the cursor to the OK
button and press the [ENTER] key.
The editing command selected in step 3 will be
executed. When processing is completed, you
will return to the state of step 1.
Tip!
• To cancel, move the cursor to the CANCEL button
and press the [ENTER] key.
• With the exception of the NAME command and the
EXPORT command, the result of the operation can
be undone by pressing the [UNDO] key immediately
after execution.