User Guide
Editing tracks and virtual tracks
7
123
Operation section
●INSERT
Insert silence into the specified part. Subsequent
audio data will be moved backward according to the
length of the silent data that was inserted.
• TRACK
Select the track into which silence will be
inserted. If you select “AL” (*) for this setting,
silence will be inserted into all virtual tracks cur-
rently selected for tracks 1–16.
• START
Specify the starting location of the part into
which silence will be inserted.
• END
Specify the ending location of the part into which
silence will be inserted.
• ALL V.TR (All virtual tracks) (*)
Select whether silence will be inserted into all
virtual tracks included in the track (Yes), or only
into the virtual track currently selected for the
track (No).
• EXECUTE
Execute the command.
●T-COMP (Time compression/expansion
Expand or compress the length of the specified part
without affecting its pitch.
• TRACK
Select the track in which you want to expand or
compress the length.
• START
Specify the starting location of the part to be
expanded/compressed.
• END
Specify the ending location of the part to be
expanded/compressed.
• RATIO
Specify the ratio of expansion/compression in
0.01% units, over a range of 50–200%.
• EXECUTE
Execute the command.
• Execution of the T-COMP command will require
more processing time than the actual time length of
the data being processed. Also, it is not possible to
cancel the command while processing is occurring.
• If multiple regions existed in the specified part, they
will be combined into a single region as a result of
executing this command. If there are gaps between
regions, they will be converted into silent audio
data.
●PITCH
Raise or lower the pitch of the specified part without
affecting the length of the audio.
• TRACK
Select the track that contains the part whose
pitch you want to change.
• START
Specify the starting location of the part whose
pitch will be changed.
• END
Specify the ending location of the part whose
pitch will be changed.
• PITCH
Specify the amount of pitch change in semitone
steps, over a range of ±12 semitones.
• FINE
Specify a fine adjustment in one-cent units to the
pitch change, over a range of ±50 cents.
• EXECUTE
Execute the command.
• Execution of the PITCH command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to can-
cel the command while processing is occurring.
• If multiple regions existed in the specified part, they
will be combined into a single region as a result of
executing this command. If there are gaps between
regions, they will be converted into silent audio
data.
1 2 3 2 3 4 5
A B C
INSERT
START END
1 2 3 4 5 A B C
1
START END
1 2 3 4 5 A B C
A B C
T-COMP
RATIO=50%
2 3 4 5
START END
1 2 3 4 5
1 2 3 4 5
A B C
B C
T-COMP
RATIO=150%