User Guide

Using the internal hard disk/external storage devices
174
Chapter
11
Operation section
Loading CD audio into a track
(CD-DA Import)
Audio data (CD-DA) from a CD inserted into the CD-
RW drive can be loaded and assigned to a track of the
AW2816. This allows you to load materials from a
commercially available sampling CD.
The unauthorized copying or reuse of commercially
available music or sound data is forbidden, with the
exception of personal use or other use allowed by
copyright law.
Tip!
In addition to conventional audio CDs, you can also
load audio data from a mixed mode CD-ROM (track 2
or later), or a CD Extra audio track (first session).
Enabling CD-DA loading
When the AW2816 is in the default state, CD-DA
loading is prohibited. Use the following procedure to
enable CD-DA import operations.
1
Press the [UTILITY] key → [F3] key.
The UTILITY screen/Prefer.3 page will appear.
2
Move the cursor to the DISABLE button in
the CD/DAT DIGITAL REC area, and press
the [ENTER] key.
A warning regarding copyright will be displayed.
Move the cursor to the NEXT button and press
the [ENTER] key to continue to the second page.
3
After you have read and understood this
warning, move the cursor to the YES but-
ton in the second page and press the
[ENTER] key.
The button display will change to “ENABLE,” and
CD-DA import operations will be enabled.
Tip!
When you want to input copy-protected digital signals
from the DIGITAL STEREO IN jack or a digital I/O
card installed in the OPTION I/O slot, you will need
to switch the CD/DAT DIGITAL REC button to
ENABLE in the same way.