User Guide

Welcome to the world of the AW2816
28
Chapter
2
Operation section
Input channels 1–8
These are monaural input channels used mainly for
inputting mics or line-level instruments. The signals
that are input to input channels 1–8 pass through an
attenuator, phase, 4-band EQ, dynamics processor,
and delay, and are sent to buses 1–8, the stereo bus,
and AUX buses 1–6. Input channels 1–8 also have a
direct output (DIRECT OUT), which allows them to be
sent directly from various output jacks or to the
recorder section.
+48V
SLOT IN
8
2
EFFECT1
EFFECT2
2
DIGITAL STEREO IN
2
Hi-z
INPUT 8
ONLY
METRONOME
INPUT PATCH
MIC/LINE INPUT
OPTION I/O SLOT
AD
INPUT
1-2
INPUT
3-8
PEAK
PEAK
INPUT1-24
PHANTOM
LINE MIC
LINE MIC
COAXIAL
AD
INPUT1-24
SELECTED INSERT RETURNS
30
INPUT 1(...8)
BUS 1 BUS 2 BUS 3 BUS 4 BUS 5 BUS 6 BUS 7 BUS 8 STEREO L STEREO R SOLO L SOLO R AUX 1 AUX 4 AUX 5(EFF1) AUX 6(EFF2)
SOLO
AUX
PAN
LEVEL
PRE/POST ON
Mono in X 8
ON
CH DIRECT OUT
PREFADER LISTEN/
AFTER PAN
INPUT SELECT
4BAND EQ
(Gain Reduction)
(EQ)
INSERT
METER
ATT
METER
METER
METER
METER
INPUT
DELAY
DY-
NAMICS
...