User Guide

75
Input/output patching
4
Operation section
• DIGITAL STEREO OUT jack
• STEREO OUT jacks
• OUTPUT 1–8 of an I/O card (OPTION I/O slot)
• In the various areas of the Patch OUT page, you may
see indications such as “I-I8” or “I-M16.” These indi-
cate that the insert send of an input channel (if the
indication starts with “I-I”) or the insert send of a
monitor channel (if the indication starts with “I-M”)
has been patched to that output jack.
• When the above selections are grayed, this indicates
that the corresponding insert send is invalid. Be
aware that in this case, no signal will be output from
that jack. (For details on patching a channel insert
send to an output jack, refer to page 78.)
Display Signal type
ST L/R Stereo output channel (L/R)
BUS 1/2–7/8 Buses 1/2–7/8
DIR 1/2–DIR 7/8
Direct output of input chan-
nels 1/2–7/8
AUX 1/2–AUX 5/6 AUX buses 1/2–5/6
RDR 1/2–RDR15/
16
Direct output of tracks 1/2–15/
16
Display Signal type
ST L/ST R L/R stereo output channels
BUS 1–BUS 8 Buses 1–8
DIR 1–DIR 8
Direct output of input chan-
nels 1–8
AUX 1–AUX 6 AUX buses 1–6
RDR 1–RDR 16 Direct output of tracks 1–16