Specifications

5
Version 2.0 Manual Supplement
Shortcut key definitions
The new version of the system program lets you assign
desired functions to various combinations of the
[SHIFT] key located at the right of the display (the
[CTRL] key), in order to create your own shortcut
keys.
1
In the UNIT section, press the [UTILITY] key
→ [F5] (CTRL Key Assign) key.
The CTRL Key Asgn. page added in version 2.0
will appear.
2
In the RIGHT SHIFT KEY area, move the
cursor to the CTRL button, and press the
[ENTER] key.
The buttons in the RIGHT SHIFT KEY area are
used to switch the function of the [SHIFT] key
located at the right of the display. When you turn
on the CTRL button, the [SHIFT] key located at
the right of the display will function as a [CTRL]
key to access shortcuts. (Even in this case, the
function of the [SHIFT] key located at the left of
the display will not be affected.)
If you turn the CTRL button on, you will be able
to assign specific functions (e.g., access a page or
turn a certain function on/off) to combinations of
the [CTRL] + [F1] – [CTRL] + [F5] keys.
A
CTRL+F1 –CTRL+F5
B
Function list
C
Assign button
D
RIGHT SHIFT KEY area
Tip!
To return the [SHIFT] key located at the right of the
display to its normal function, move the cursor to the
SHIFT button and press the [ENTER] key.
3
Select the shortcut key combination
(CTRL+F1–CTRL+F5) to which you want to
assign a function, move the cursor to that
combination, and press the [ENTER] key.
The corresponding symbol will be highlighted,
allowing you to assign a function.
Tip!
When the AW4416 is in its initial state, all shortcut
keys are set to No Assign.
4
Move the cursor to the function list, and
use the [DATA/JOG] dial to select the func-
tion that you want to assign.
For a list of the functions that can be selected,
refer to page 25.
Tip!
If you select SCENE RECALL as the assigned function,
a field allowing you to specify the scene number will
appear at the right of the function list. Move the cur-
sor to this area, and use the [DATA/JOG] dial to spec-
ify the scene number.
5
Move the cursor to the ASSIGN button,
and press the [ENTER] key.
A popup window will appear, asking you to con-
firm the assignment.
6
To confirm the assignment, move the cur-
sor to the OK button and press the [ENTER]
key.
7
To execute the assigned function, hold
down the [CTRL] key (the [SHIFT] key at
the right of the display), and press the cor-
responding function key.
[Reference pages]
For details on the CTRL Key Asgn. page → P.25
2
3
4
1