User Guide

SET UP screen

— Reference Guide 27

● LAST SOLO

When the Solo function is on, only the channel

last-selected by pressing its [ON] key will be

monitored.

● MIX SOLO

When the Solo function is on, all channels

selected by pressing their [ON] keys will be

monitored.

D LEVEL

This adjusts the level of the signal that is sent to

the SOLO bus when RECORDING SOLO mode

is selected for 1.

E SOLO SAFE CHANNEL

This area selects the channels that will be

excluded from the Solo function when MIX-

DOWN SOLO is selected for 1. Channels that

are turned on in this area will not be affected

when you press the [SOLO] key.

■ Additional functions in the Solo

Setup page

In the Solo Setup page, you can press the [SHIFT]

key to assign the following function to the [F1] key.

• [F1] (CHANGE TAB) key

Switch between the two types of tab display.