Specifications

Appendix
Appendix–22 — Reference Guide
DELAY->REV
Delay and reverb effects in series.
DIST->DELAY
Distortion and delay effects in series.
Parameter Range Description
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB.DLY 0.0–1000.0 ms Feedback delay time
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
DELAY HI 0.1–1.0 Delay high-frequency feedback ratio
REV TIME 0.3–99.9 s Reverb time
INI.DLY 0.0–500.0 ms Initial delay before reverb begins
REV HI 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left-right reverb spreed)
DENSITY 0–100% Reverb density
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
DLY/REV 0–100%
Delay and delayed reverb balance (0% = delayed reverb, 100% =
delay)
MIX BAL. 0–100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
TONE –10 to +10 Tone control
N.GATE 0–20 Noise reduction
DELAY 0.0–2725.0 ms Delay time
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
DLY BAL 0–100%
Distortion and delay balance (0% = distortion, 100% = delayed dis-
tortion)