Specifications

- 11 -
Outputs
“IOA” and “IOB” are the connections to additional input/output units such as the
AX44. For each DS2416 card, you can add two extra input/output units (IOA and
IOB). In the case of the AX44, each unit has 4 inputs and outputs.
❐ As you see, the default routing only provides access to four extra outputs (for use with
external effects, etc). To be able to use all additional inputs and outputs, you will need
to re-configure the input and output routing. This is described on page 29.
The On-Board Effects
The DS2416 card carries two powerful effect processors, which can easily be ac-
cessed with the default routing:
• Signals are routed to the effects using Aux Send 5 (FX Unit 1) and Aux Send 6 (FX Unit 2).
The effect inputs are in mono.
• The stereo output signals from the effects are routed to the “FX Return channels” (DS
Channels 21/22 for FX Unit 1 and 23/24 for FX Unit 2).
To avoid feedback, Aux Sends 5 and 6 are disabled for these DS channels.
Bus/Send in the DSP Factory Input Console Physical Output
Master Stereo Out Left/Right DS2416 Analog Out Left/Right
and
DS2416 Digital Out Left/Right
Aux Send 1 IOA/IOB Output 1
Aux Send 2 IOA/IOB Output 2
Aux Send 3 IOA/IOB Output 3
Aux Send 4 IOA/IOB Output 4