Specifications

- 14 -
The Upper Display
1. Locate the dividing line between the Upper and Lower display for the channel strip.
2. Point at the small triangle pointing upward, and press the mouse button.
A pop-up menu appears with the five modes for the Upper display.
3. Select one of the display modes.
If you select the “Narrow” mode, the channel strip will be as narrow as possible to conserve
screen space, with no controls in the Upper display (see below). The controls in the other
modes are described on page 17.
About the “Narrow” mode
The selection of display modes is independent for the Upper and Lower displays,
with one exception:
• Selecting the “Narrow” mode for the Upper or Lower display will automatically select
the “Narrow” mode for the other display as well.
Since the width of the whole channel strip is minimized, there is then no room for any addi-
tional controls in either display.