Specifications

- 27 -
The Output Patchbay
This window allows you to view and change the output routing, i.e. which buses
and sends are routed to which outputs, and also contains word clock synchroniza-
tion settings, for when you use the DSP Factory in conjunction with external digital
recorders or other audio hardware.
Output Routing section
Each bus or send can be routed to any output or any combination of outputs. How-
ever, it is not possible to route several different buses to the same output.
In the Output Patchbay window, the output pairs are listed to the left:
• To select another bus or send for an output pair, pull down the pop-up menu to the
right of the output and select another source from the list.
Output Description
DS2416
#1 - #4
These are the recording outputs. In Cubase VST, these are connected to the Audio In-
puts, so that Rec 1/2 corresponds to Input 1 L/R, etc.
IOA 1-4 Outputs 1-4 on the first additional input/output unit (e.g. an AX44).
IOB 1-4 Outputs 1-4 on the second additional input/output unit.
Analog The analog outputs on the DS2416.
S/P DIF The digital outputs on the DS2416.
IOA 5-8 If you have an input/output unit with eight outputs, IOA 5-8 are used to address out-
puts 5-8 on this unit.
IOB 5-8 As above, but for a second 8-i/o unit (connected as “unit B”).