Owner's Manual
Table Of Contents
CONTROLS
AND
FUNCTIONS
1 Open the battery compartment cover.
2 Insert two supplied batteries
(AAA, R03, UM-4) according to the polarity
markings
(+ and
-)
on the inside of the
battery compartment.
3 Close the cover back.
• Notes on batteries
• Change all
of
the batteries
if
you notice the following
conditions; the operation range
of
the remote control decreases,
the indicator does not flash or its light becomes dim.
• Use AAA, R03, UM-4 batteries.
• Make sure that the polarities are correct. See the illustration
inside the battery compartment.
• Remove the batteries
if
the remote control
is
not used for an
extended period
of
time.
• Do not use old batteries together with new ones.
• Do not use different types
of
batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types
of
batteries may have the same shape and
color.
•
We
strongly recommend using alkaline batteries.
•
If
the batteries have leaked, dispose
of
them immediately. Avoid
touching the leaked material
or
letting
it
come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not
throwaway
batteries with general house waste; dispose
of
them correctly
in
accordance with your local regulations.
6
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel
of
this unit during
operation.
• Handling the remote control
• The area between the remote control and this unit must
be clear
of
large obstacles.
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types
of
conditions:
places
of
high humidity, such as near a bath
places
of
high temperature, such as near a heater or
a stove
- places
of
extremely low temperatures
dusty places
• Do not expose the remote control sensor to strong
lighting, in particular, an inverter type fluorescent
lamp; otherwise, the remote control may not work
properly.
If
necessary, position this unit away from
direct lighting.