Owner's Manual

PLA YING AND RECORDING
4 Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to adjust
the sound output level.
N()t~i
• The VOLUME, BASS, TREBLE, BALANCE and
LOUDNESS controls and the
CD/DVD DIRECT AMP switch
(and the PURE DIRECT switch for AX-497 only) have no
effect on the source being recorded.
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
Front panel
or
Remote control
• AX-497
3,6
1 4
5 Begin recording on the tape deck or the MD
recorder.
6 Rotate the INPUT selector on the front panel
(or press TAPE or MD on the remote control)
to select TAPE or MD and then monitor the
sound being recorded on the tape deck or
the MD recorder.
INPUT
fi'fj'M
,JL,al
Selecting another source with the INPUT selector on the front
panel (or the corresponding input selector button on the remote
control) while recording is in progress will not affect the
recording.
1 Rotate the REC OUT selector on the front
panel to select the source you want to
record.
2 Play the source.
3 Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the input source
you want to listen to.
Front panel
or
Remote control
INPUT
Front panel
14
or
Remote control