User Manual

Software Update for BD-S1900/BD-S1065
Page.4 of 5
STEP5 Start software update
Select “Yes” and press [ENTER] on the remote controller to start the
update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
When the update is completed, Blu-ray Disc Player will power itself off
automatically. (The front panel display will turn off)
If the update doesn’t start, check the troubleshooting section on the
last page.
STEP6 Remove the USB Drive and power on.
STEP7 Check the updated version.
Using the remote controller, press [SETUP].
Select “Settings” > “Version”.
Check that the update version is “YM9200400”
STEP8 Exit from setup menu.
Press [EXIT] button on the remote controller to exit from setup menu.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.