Owner's Manual
15 En
English
CONNECTION
2
■ Connecting to the REMOTE
CONTROL jacks
– You can transmit the remote control signals by
connecting to the REMOTE CONTROL (OUT/IN)
jacks.
– Firmly connect 3.5mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks (1 and 2, or 3 and
4).
Caution!
Be sure to turn off this Player and the
equipment before making any
connections.
Hint
– The RS-232C terminal is a control expansion
terminal for commercial use. Consult your dealer for
details.
■ Connecting the power cable
– Plug the supplied power cable into the AC IN
terminal on the rear of the Player. Then plug into AC
outlet.
Note
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
Other Connections
VIDEO OUT
O
NENT
PB
PR S VIDEO
DIGITAL OUT
COAXIAL
OPTICAL
NETWORK
USB
BD STORAGE/
SERVICE
REMOTE CONTROL
OUT
IN
RS-232C
HDMI
REMOTE CONTROL IN
REMOTE CONTROL OUT
This Player
3
To REMOTE
CONTROL (IN)
jack
3.5mm mini plug cable
(commercially available)
4
To remote
control out
jack
IR flasher or Yamaha
component
2
To remote
control in
jack
3.5mm mini plug
cable
(commercially
available)
Infrared signal receiver
or Yamaha component
(such as AV receiver)
1
To REMOTE
CONTROL
(OUT) jack
CENTER
SURROUND
BACK
SURROUND
F
SUBWOOFER
R
L
AUDIO OUT
AC IN
To AC outlet
To AC IN terminal