Manual

HDMI 1080p 24Hz
This outputs the BD-Video encoded in 24Hz frame rate in
HDMI 1080p 24Hz. Smoother video playback may be
available with this function. This function is available
when your TV/AV receiver support this function, and this
Player is connected with an HDMI cable. For more details
on output formats, refer to "About the video output
formats" (p. 29).
Auto*, Off
q_LIq_rr_,_rr
Noise Reduction
You can set the Noise Reduction to a level of 0 to 3.0 is
off, and 3 is the maximum level.
g, 1,2", 3
De-interlacing Mode
You can select how to detect the video signal. Set to Auto
lZ)rnormal use. When horizontal stripping noise appears
on the screen, set this to Film/Video to remove the noise.
Auto*, Film, Video
- This setting is disabled when output resolution is
other than 1080p.
Lip Sync
You can set/adjust the Lip Sync (p. 35) function.
Auto* This Player adjusts the Lip Sync function
automatically.
Manual You can adjust the Lip Sync function manually. You
can set the delay of the audio for 2D and 3D contents
independently.
2D
3D
off
This Player does not adjust the Lip Sync l'unction.
Video Process
Video Mode
You can select Vide() Mode below.
Standard* The image is most natural and well-balanced. This
mode suits for normal use.
Vivid The image is more vivid and sharp.
Cinema The image suits for watching movie in dark room.
Custom You can adjust the visual image manually. Press
A/V to select the parameter, then press _1/_ to
adjust the figure.
Brightness
Adjusts the overall brightness of the image.
Saturation
Adjusts the richness of the coh)r in the projected
image.
Hue
Adjusts the tint of the projected image.
Contrast
Adjusts the brightareas (white lex,cls) inthe image.
Sharpness
Adjusts the sharpness of objects in the ',.ideo.
CTI
Smoothes out the edges of color images. Color
images am rendered more distinct.
The defaultsettingsare0.
Color Adjust
You can adjust Brightness/Saturation/Hue for each color
(Red/Green/Blue/Yenow/Cyan/Magenta). To use this
function, set Video Mode to Custom. For details on the
setting items, see "Video Mode" (p. 27).
The default settings are 0.
• Audio Setting
The default settings are marked with .....
Audio Output
HDMI
You can select the output mode of HDMI terminal. For more
details on output formats, refer to "About the audio output
formats" (p. 28).
Bitstream*, PCM, Reencode, Off
- To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set Video Out
Select to Auto or more than 720p (p. 26).
DRC
You can set the DRC (Dynamic Range Compression)
(p. 34) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto*
• System Information
Software version and MAC address (p. 35) are displayed.
(/1
I,Q
27 En