Owner`s manual

31 En
SETUP menu
Settings
4
■ Audio Setting
The default settings are marked with “
*
”.
Audio Output
HDMI
You can select the output mode of HDMI terminal. For more
details on output formats, refer to “About the audio output
formats” (p. 32).
– To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p (p. 30).
DRC
You can set the DRC (Dynamic Range Compression)
(p. 38) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto
*
■ System Information
Software version and MAC address (p. 39) are displayed.
Bitstream
*
Outputs digital signal without any processing.
Secondary Audio is not output.
PCM Outputs 2-channel PCM.
Reencode
Outputs Bitstream with Secondary Audio.
Off Mutes sound.
Note